200-125 Exam Questions - Online Test

200-125 Premium VCE File

Learn More 100% Pass Guarantee - Dumps Verified - Instant Download
150 Lectures, 20 Hours

Exam Code: 200 125 ccna (Practice Exam Latest Test Questions VCE PDF)
Exam Name: CCNA Cisco Certified Network Associate CCNA (v3.0)
Certification Provider: Cisco
Free Today! Guaranteed Training- Pass ccna routing and switching 200 125 pdf Exam.

P.S. 100% Guarantee 200-125 lab are available on Google Drive, GET MORE: https://drive.google.com/open?id=1IiiyEYVh7VGuzQjIt9B135ONv4m9W195

New Cisco 200-125 Exam Dumps Collection (Question 4 - Question 13)

Q4. Which statement about access lists that are applied to an interface is true?

A. You can place as many access lists as you want on any interface.

B. You can apply only one access list on any interface.

C. You can configure one access list, per direction, per Layer 3 protocol.

D. You can apply multiple access lists with the same protocol or in different directions.

Answer: C

Explanation:

We can have only 1 access list per protocol, per direction and per interface. It means:

+ We cannot have 2 inbound access lists on an interface

+ We can have 1 inbound and 1 outbound access list on an interface

Q5. Refer to the diagram.

All hosts have connectivity with one another. Which statements describe the addressing scheme that is in use in the network? (Choose three.)

A. The subnet mask in use is 255.255.255.192.

B. The subnet mask in use is 255.255.255.128.

C. The IP address 172.16.1.25 can be assigned to hosts in VLAN1

D. The IP address 172.16.1.205 can be assigned to hosts in VLAN1

E. The LAN interface of the router is configured with one IP address.

F. The LAN interface of the router is configured with multiple IP addresses.

Answer: B,C,F

Explanation:

The subnet mask in use is 255.255.255.128: This is subnet mask will support up to 126 hosts, which is needed.

The IP address 172.16.1.25 can be assigned to hosts in VLAN1: The usable host range in this subnet is 172.16.1.1-172.16.1.126

The LAN interface of the router is configured with multiple IP addresses: The router will need 2 subinterfaces for the single physical interface, one with an IP address that belongs in each VLAN.

Q6. Scenario

Refer to the topology. Your company has decided to connect the main office with three other remote branch offices using point-to-point serial links.

You are required to troubleshoot and resolve OSPF neighbor adjacency issues between the main office and the routers located in the remote branch offices.

An OSPF neighbor adjacency is not formed between R3 in the main office and R5 in the Branch2 office. What is causing the problem?

A. There is an area ID mismatch.

B. There is a PPP authentication issue; a password mismatch.

C. There is an OSPF hello and dead interval mismatch.

D. There is a missing network command in the OSPF process on R5.

Answer: C

Explanation:

The u201cshow ip ospf interface command on R3 and R5 shows that the hello and dead intervals do not match. They are 50 and 200 on R3 and 10 and 40 on R5.

Q7. What are the Populardestinations for syslog messages to be saved? (Choose three)

A. Flash

B. The logging buffer .RAM

C. The console terminal

D. Other terminals

E. Syslog server

Answer: B,C,E

Explanation:

By default, switches send the output from system messages and debug privileged EXEC commands to a logging process. The logging process controls the distribution of logging messages to various destinations, such as the logging buffer (on RAM), terminal lines (console terminal), or a UNIX syslog server, depending on your configuration. The process also sends messages to the console.

Note: Syslog messages can be written to a file in Flash memory although it is not a popular place to use. We can configure this feature with the commandlogging file flash:filename.

Q8. CORRECT TEXTCCNA.com has a small network that is using EIGRP as its IGP. All routers should be running an EIGRP AS number of 12. Router MGT is also running static routing to the ISP.

CCNA.com has recently added the ENG router. Currently, the ENG router does not have connectivity to the ISP router. All over interconnectivity and Internet access for the existing locations of the company are working properly.

The taskis to identify the fault(s) and correct the router configuration(s) to provide full connectivity between the routers.

Access to the router CLI can be gained by clicking on the appropriate host.

All passwords on all routers arecisco.

IP addresses are listed in the chart below.

MGT

Fa0/0 u2013 192.168.77.33

S1/0 u2013 198.0.18.6

S0/0 u2013 192.168.27.9

S0/1 u2013 192.168.50.21

ENG

Fa0/0 u2013 192.168.77.34

Fa1/0 u2013 192.168.12.17

Fa0/1 u2013 192.168.12.1

Parts1

Fa0/0 u2013 192.168.12.33

Fa0/1 u2013 192.168.12.49

S0/0 u2013 192.168.27.10

Parts2

Fa0/0 u2013 192.168.12.65

Fa0/1 u2013 192.168.12.81

S0/1 u2013 192.168.50.22

Answer:

On the MGT Router: Config t

Router eigrp 12

Network 192.168.77.0

Q9. In a GLBP network, who is responsible for the ARP request?

A. AVF

B. AVG

C. Active Router

D. Standby Router

Answer: B

Explanation:

Members of a GLBP group elect one gateway to be the active virtual gateway (AVG) for that group. Other group members provide backup for the AVG in the event that the AVG becomes unavailable. The AVG assigns a virtual MAC address to each member of the GLBP group. Each gateway assumes responsibility for forwarding packets sent to the virtual MAC address assigned to it by the AVG. These gateways are known as active virtual forwarders (AVFs) for their virtual MAC address.

The AVG is responsible for answering Address Resolution Protocol (ARP) requests for the virtual IP address. Load sharing is achieved by the AVG replying to the ARP requests with different virtual MAC addresses.

Reference: http://www.cisco.com/en/US/docs/ios/12_2t/12_2t15/feature/guide/ft_glbp.html

Q10. Refer to the exhibit.

A network administrator attempts to ping Host2 from Host1 and receives the results that are shown. What is the problem?

A. The link between Host1 and Switch1 is down.

B. TCP/IP is not functioning on Host1

C. The link between Router1 and Router2 is down.

D. The default gateway on Host1 is incorrect.

E. Interface Fa0/0 on Router1 is shutdown.

F. The link between Switch1 and Router1 is down.

Answer: C

Explanation:

Host1 tries to communicate with Host2. The message destination host unreachable from Router1 indicates that the problem occurs when the data is forwarded from Host1 to Host2. According to the topology, we can infer that the link between Router1 and Router2 is down.

Q11. Refer to the exhibit.

Which address range efficiently summarizes the routing table of the addresses for router Main?

A. 172.16.0.0./21

B. 172.16.0.0./20

C. 172.16.0.0./16

D. 172.16.0.0/18

Answer: B

Explanation:

The 172.16.0.0./20 network is the best option as it includes all networks from 172.16.0.0 u2013 172.16.16.0 and does it more efficiently than the /16 and /18 subnets. The /21 subnet will not include all the other subnets in this one single summarized address.

Q12. Refer to the exhibit.

A junior network administrator was given the task of configuring port security on SwitchA to allow only PC_A to access the switched network through port fa0/1. If any other device is

detected, the port is to drop frames from this device. The administrator configured the interface and tested it with successful pings from PC_A to RouterA, and then observes the output from these two show commands.

Which two of these changes are necessary for SwitchA to meet the requirements? (Choose two.)

A. Port security needs to be globally enabled.

B. Port security needs to be enabled on the interface.

C. Port security needs to be configured to shut down the interface in the event of a violation.

D. Port security needs to be configured to allow only one learned MAC address.

E. Port security interface counters need to be cleared before using the show command.

F. The port security configuration needs to be saved to NVRAM before it can become active.

Answer: B,D

Explanation:

From the output we can see that port security is disabled so this needs to be enabled. Also, the maximum number of devices is set to 2 so this needs to be just one if we want the single host to have access and nothing else.

Q13. An administrator is trying to ping and telnet from SwitchC to RouterC with the results shown below.

Click the console connected to RouterC and issue the appropriate commands to answer the questions.

What would be the effect of issuing the commandip access-group 114 into the fa0/0 interface?

A. Attempts to telnet to the router would fail.

B. It would allow all traffic from the 10.4.4.0 network.

C. IP traffic would be passed through the interface but TCP and UDP traffic would not.

D. Routing protocol updates for the 10.4.4.0 network would not be accepted from the fa0/0 interface.

Answer: B

Explanation:

From the output of access-list 114: access-list 114 permit ip 10.4.4.0 0.0.0.255 any we can easily understand that this access list allows all traffic (ip) from 10.4.4.0/24 network

P.S. Easily pass 200-125 Exam with 2passeasy 100% Guarantee Dumps & pdf vce, Try Free: https://www.2passeasy.com/dumps/200-125/ (889 New Questions)