NEW QUESTION 1
Which statement about SNMP support on Cisco Nexus switches is true?

• A. Cisco NX-OS only supports SNMP over IPv4.
• B. Cisco NX-OS supports one instance of the SNMP per VDC.
• C. SNMP is not VRF-aware.
• D. SNMP requires the LAN_ENTERPRISE_SERVICES_PKG license.
• E. Only users belonging to the network operator RBAC role can assign SNMP group

Answer: B

Explanation: Cisco NX-OS supports one instance of the SNMP per virtual device context (VDC). By default, Cisco NX-OS places you in the default VDC. SNMP supports multiple MIB module instances and maps them to logical network entities. SNMP is also VRF aware. You can configure SNMP to use a particular VRF to reach the SNMP notification host receiver. You can also configure SNMP to filter notifications to an SNMP host receiver based on the VRF where the notification occurred.
Reference: http://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/5_x/nxos/system_management/configuration/guide/sm_nx_os_cg/sm_9snmp.html

NEW QUESTION 2
During the design of a new Cisco Data Center Network, a customer asked when VM-FEX would be used with Cisco Nexus 1000V Switch. Which scenario is most appropriate?

• A. when a host must utilize a vSwitch and a distributed vSwitch
• B. when using Non-UCS Servers to provide virtualization services with Nexus FEX modules
• C. They are mutually exclusive of each other.
• D. when a Cisco UCS C-Series server requires Cisco Nexus 1000V Switch to provide VM connectivity

Answer: C

NEW QUESTION 3
You are configuring OTV between two data centers. On which interfaces should the site VLAN allowed?

• A. the interfaces that connect to the aggregation switches
• B. the OTV overlay interfaces
• C. the interfaces that connect to the join interfaces
• D. the mgmt0 interfaces

Answer: A

NEW QUESTION 4
Which four options are capabilities of the Cisco Nexus 5000 and 5500 Series Switch? (Choose four.)

• A. line rate
• B. managed by a parent switch
• C. lossless 10 Gigabit Ethernet
• D. lossless 100 Gigabit Ethernet
• E. low latency
• F. extremely low latency
• G. hosts a virtual supervisor module

Answer: ACEG

NEW QUESTION 5
If vPC peer keepalives are used between vPC peers, which VRF is used by default?

• A. management
• B. default
• C. The user must dedicate a VRF for keepalives.
• D. system

Answer: A

NEW QUESTION 6
When configuring OSPF, which two network types will avoid the DR and BDR election process between connected devices? (Choose Two)

• A. non-broadcast
• B. multi-access
• C. point-to-multipoint
• D. broadcast
• E. point-to-point

Answer: CE

NEW QUESTION 7
Assuming hello PDU authentication has been disabled, which command re-enables the feature on a FabricPath interface?

• A. switch (config-if) # fabricpath isis authentication-type cleartext
• B. switch (config-if) # fabricpath isis authentication-type md5
• C. switch (config-if) # fabricpath isis authentication check
• D. switch (config-if) # fabricpath isis hello-interval

Answer: C

NEW QUESTION 8
Which situation must you consider when you add a remote RADIUS server to a Cisco Nexus device?

• A. If RADIUS authentication fails, the device falls back to local authentication automatically.
• B. If RADIUS authentication fails, the user is denied access with no further authentication checks.
• C. If the RADIUS server is unreachable, users are unable to log in.
• D. If the RADIUS server is unreachable, all users are given access with the default rol

Answer: B

NEW QUESTION 9
You enable the HSRP feature on a Cisco Nexus 7000 Series switch. You must ensure that the switch manages packets that are sent to the local vPC MAC address, remote vPC MAC address, and HSRP virtual MAC address. Which command should you run?

• A. Peer-gateway
• B. hsrp preempt
• C. map-server
• D. peer-switch

Answer: A

NEW QUESTION 10
Refer to the exhibit.

Which statement about the NetFlow implementation is true?

• A. It samples inbound IPv6 traffic on Ethernet 2/1
• B. It uses TCP for data export.
• C. It samples outbound traffic on Ethernet 2/1
• D. It samples inbound traffic on Ethernet 2/1

Answer: D

Explanation: Reference:
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/fnetflow/configuration/15-mt/fnf-15-mtbook/use-fnflow-redce-cpu.html

NEW QUESTION 11
When a local RBAC user account has the same name as a remote user account on an AAA server, what happens when a user with that name logs into a Cisco Nexus switch?

• A. The user roles from the remote AAA user account are applied, not the configured local user roles.
• B. All the roles are merged (logical OR).
• C. The user roles from the local user account are applied, not the remote AAA user roles.
• D. Only the roles that are defined on both accounts are merged (logical AND).

Answer: C

Explanation: If you have a user account configured on the local Cisco NX-OS device that has the same name as a remote user account on an AAA server, the Cisco NX-OS software applies the user roles for the local user account to the remote user, not the user roles configured on the AAA server.
Reference: http://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/4_1/nxos/ security/configuration/guide/sec_nx-os-cfg/sec_rbac.html

NEW QUESTION 12
Without having access to Fabric Path show commands, how can you confirm whether Fabric Path is configured on the two vPC peer 7K-3 and 7K-4?

• A. Show vpc would not indicate any downstream virtual port channel vPC parameter with active VLANs
• B. Show vpc role on both 7K-3 and 7K-4 would indicate their role as primary
• C. Show interface would indicate port-channel 1 and 2 would use a port mode of Fabric path 0.
• D. Show hsrp would be blank, since FHRP is not supported or required when using Fabric Path

Answer: A

NEW QUESTION 13
Which example creates an Embedded Event Manager policy allowing the CLI command to execute,
and triggers an SNMP notification when a user enters configuration mode?
A)

B)

C)

D)

• A. Option A
• B. Option B
• C. Option C
• D. Option D

Answer: A

NEW QUESTION 14
You have a vPC configuration with two functional peers. The peer link is up and the peer-link feature is restricted the spanning-tree operations in the configuration? '(choose two)

• A. vPC imposes a rule that the peer link is always blocking.
• B. vPC removes some VLANs from the spanning tree for vPC use.
• C. The primary and secondary switch generate and process BPDUs.
• D. vPC requires the peer link to remain in the forwarding state.
• E. The secondary switch processes BPDUs only if the peer-link fail

Answer: CD

NEW QUESTION 15
Which FCoE component is responsible for the encapsulation and de-encapsulation of Fibre Channel frames in Ethernet?

• A. distributed FCF
• B. FCoE node
• C. FCoE logical endpoint
• D. Fibre Channel forwarder
• E. FCoE forwarder

Answer: C

Explanation: The FCoE Logical Endpoint (FCoE_LEP) is responsible for the encapsulation and deencapsulation functions of the FCoE traffic. FCoE_LEP has the standard Fibre Channel layers, starting with FC-2 and continuing up the Fibre Channel Protocol stack.
Reference:
https://www.safaribooksonline.com/library/view/ccna-dataQuestions& Answers PDF P-106 center/9780133860429/ch11lev3sec5.html

NEW QUESTION 16
Which three options of encryption are supported in PIM hello messages? (Choose three.)

• A. cleartext
• B. DES-SHA1
• C. DES-CBC3-SHA
• D. Cisco Type 7
• E. RC4-SHA
• F. 3DES

Answer: ADF

NEW QUESTION 17
Which action limits the maximum number of routes that are allowed in the routing table?

• A. Use a BGP filter.
• B. Use only static routes.
• C. Use the maximum routes command inside address family.
• D. Use a route map to filter route

Answer: C

NEW QUESTION 18
Which two functions are enabled when you set up vPC+ at the FabricPath edge? (Choose two.)

• A. the ability to attach Cisco Fabric Extenders in FEX active/active mode
• B. the ability to stop all Layer 3 egress traffic
• C. the ability to attach servers to edge switches with port-channel teaming
• D. the ability to attach additional Classic Ethernet switches in vPC+ mode

Answer: AC