NEW QUESTION 1
You plan to implement the OSPF protocol whithin the data center network. Which two statements accurately describe OSPF on the Cisco NX-OS platform? (Choose two.)

• A. The default reference bandwidth is 10 Gbps.
• B. OSPF does nor require additional licenses.
• C. The OSPF area can be configured by using decimal notation only.
• D. Redistributing routes into OSPF requires a route map.
• E. The secondary IP address is advertised by defaul

Answer: DE

NEW QUESTION 2
Refer to the exhibit.

What is the result of running the command?

• A. The running config is backed up to the TFTP server by using a file named nexus-core-a-cfg.
• B. The default VRF is used to establish a connection to the TFTP server.
• C. The startup config file is backed up.
• D. A timestamp is included in the name of the file that is backed up to the TFTP serve

Answer: A

NEW QUESTION 3
DRAG DROP
Drag and drop the spanning tree types on the left to their correct descriptions on the right

Answer:

Explanation:

NEW QUESTION 4
DRAG DROP
VSANs and SAN Zoning have similar security goals, but also have different qualities. Drag the characteristic on the left to the appropriate column heading (VSAN or Zoning) on the right.

Answer:

Explanation:

NEW QUESTION 5
Which three options are CallHome predefined destination profiles that are supported on Cisco NXOS? (Choose three.)

• A. CiscoTAC-1
• B. full-text-destination
• C. pager-xml-destination
• D. short-text-destination
• E. xml-text-destination
• F. pager-json-destination

Answer: ABD

NEW QUESTION 6
Refer to the exhibit.

Which option is expected outcome on the configured switch?

• A. The switch enforces SNMP message encryption for all users
• B. The switch responds with an authorization error for any SNMPv3 PDU requests that use a security level parameter.
• C. SNMP requires encryption for all incoming requests
• D. The switch enforces SNMP message encryption for the user al

Answer: D

NEW QUESTION 7
Which two statements about implementing Cisco NPV and NPIV on a Cisco Nexus 5000 Series switch are true? (Choose two.)

• A. STP must run inside the FP network.
• B. All VLANs must be in the same mode, CE, or FP.
• C. FP port can join the private and nonprivate VLANs.
• D. Only F and M series modules can run FabricPath.
• E. These require an enhanced Layer 2 license to ru

Answer: BE

Explanation: With the Nexus 5x00 switch, FCoE functionality is a licensed feature. After the license is installed, FCoE configuration can be completed.
Reference: http://www.ciscopress.com/articles/article.asp?p=2030048&seqNum=4

NEW QUESTION 8
Refer to the exhibit.

The configuration belongs to which link?

• A. Link A on Switch2
• B. Link B on Switch2
• C. Link C on Switch4
• D. Link D on Switch4

Answer: D

NEW QUESTION 9
Refer to the exhibit.

What is the result?

• A. The switch implements a rollback file that is named running-config
• B. The switch implements a rollback and skips any errors
• C. The switch implements a rollback that stops if an error occurs
• D. The switch implements a rollback only if no errors occur

Answer: D

NEW QUESTION 10
Which command is used to associate EID-to-RLOC for a LISP site?

• A. #feature lisp
• B. #ipv6 lisp itr
• C. #ip lisp database-mapping
• D. #ip lisp itr map-resolver

Answer: C

NEW QUESTION 11
When you configure LISP, which two components must be configured at the site edge? (Choose two.)

• A. AED
• B. ELAN
• C. ITR
• D. EOBC
• E. ETR

Answer: CE

NEW QUESTION 12
Which task must be done before a zone set takes effect?

• A. Add a member to the zone.
• B. Enter the exit config t command.
• C. Enter the copy running-config startup-config command.
• D. Enter the zoneset activate name <zone-name> vsan <vsan-#> comman

Answer: D

NEW QUESTION 13
Which two reasons explain why a server on VLAN 10 is unable to join a multicast stream that originates on VLAN 20? (Choose two.)

• A. IGMP snooping and mrouter are not enabled on VLAN 10.
• B. VLAN 20 has no IGMP snooping querier defined and VLAN 10 has no mrouter.
• C. The mrouter on VLAN 20 does not see the PIM join.
• D. The mrouter must be on VLAN 10 and VLAN 20.

Answer: AC

Explanation: IGMP snooping is a mechanism to constrain multicast traffic to only the ports that have receivers attached. The mechanism adds efficiency because it enables a Layer 2 switch to selectively send out multicast packets on only the ports that need them. Without IGMP snooping, the switch floods the packets on every port. The switch "listens" for the exchange of IGMP messages by the router and the end hosts. In this way, the switch builds an IGMP snooping table that has a list of all the ports that have requested a particular multicast group.
The mrouter port is simply the port from the switch point of view that connects to a multicast router. The presence of at least one mrouter port is absolutely essential for the IGMP snooping operation to work across switches.
All Catalyst platforms have the ability to dynamically learn about the mrouter port. The switches passively listen to either the Protocol Independent Multicast (PIM) hellos or the IGMP query messages that a multicast router sends out periodically.
Reference:
http://www.cisco.com/c/en/us/support/docs/switches/catalyst-6500-series-switches/68131-catmulticast- prob.html

NEW QUESTION 14
The Connectivity Management Processor monitors the active supervisor module on a Cisco Nexus 7000 switch and will reboot the device in the event of a lights-out management issue. However, which option includes features that provide similar benefits in the absence of the Connectivity Management Processor?

• A. high-availability functionality from features such as vPC and NSF
• B. traditional system connectivity models like SNMP, GUI, or SSH
• C. Cisco FabricPath
• D. VDC failover

Answer: A

Explanation: vPC uses the vPC peer-keepalive link to run hello messages that are used to detect a dual-active scenario. A Gigabit Ethernet port can be used to carry the peer-keepalive messages. A dedicated VRF is recommended to isolate these control messages from common data packets. When an out-ofband network infrastructure is present, the management interfaces of the Cisco Nexus 7000
supervisor could be also used to carry keep-alive connectivity using the dedicated management VRF. When the vPC peer-link is no longer detected, a dual-active situation occurs, and the system disables all vPC port channel member on the "secondary" vPC peer (lower vPC role priority value). Also SVI interfaces associated to a vPC VLAN are suspended on the secondary switch. As a result, in this
condition only the “primary” vPC peer actively forwards traffic on the vPC VLANs. Multiple peerkeepalive links can be used to increase resiliency of the dual-active detection mechanism.
Both the Cisco Catalyst 6500 and the Cisco Nexus 7000 offer a variety of high-availability features. Some of the primary features to highlight are In Service Software Upgrade (ISSU), Stateful Switchover (SSO), and Nonstop Forwarding (NSF). The operation and the behavior of these features are unique
to the respective platform and can be independently executed without affecting the interoperability between the two platforms.
Reference:
http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-6500-seriesswitches/white_paper_c11_589890.html

NEW QUESTION 15
You have a Switch that is operating NPV mode. The interfaces of the switch use which port type to connect to the core network?

• A. TE Port
• B. NP Port
• C. E Port
• D. F Port

Answer: B

NEW QUESTION 16
Which two Cisco Nexus platforms support Adapter FEX? (Choose two.)

• A. Cisco Nexus 7000 Series Switches
• B. Cisco Nexus 5000 Series Switches
• C. Cisco Nexus 5500 Series Switches
• D. Cisco Nexus 4000 Series Switches
• E. Cisco Nexus 2000 Series Fabric Extenders

Answer: CE

Explanation: At the access layer, the Adapter-FEX requires a FEX-enabled adapter on a server that connects to a parent device that supports virtualization of interfaces. The Adapter-FEX is supported on the following platforms:
• The Cisco Unified Computing System (UCS) platform supports Adapter-FEX between UCS servers and the UCS Fabric Interconnect.
• The Adapter-FEX is supported on the Cisco Nexus 5500 Series platform and on the Cisco Nexus 2200 Fabric Extender that is connected to a Cisco Nexus 5500 Series parent device. This implementation works on a variety of FEX-capable adapters, including the Cisco UCS P81E virtual interface card (VIC) adapter for the UCS C-Series platform and third party adapters such as the Broadcom BCM57712 Convergence Network Interface Card, that implement the virtual network tag (VNTag) technology.
Reference: http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5000/sw/operations/adapter_fex
/513_n1_1/ops_adapter_fex/ops_using_adapter_fex.html

NEW QUESTION 17
Refer to the exhibit.

Which two features must you configure on Switch 2 to establish a VSAN trunk between Switch 1 and Switch 2? (Choose two.)

• A. Trunk Mode On
• B. F port
• C. E port
• D. NP port
• E. Trunk Mode Auto

Answer: CE

NEW QUESTION 18
Which three attributes encompass a local user account on a Cisco NX-OS device? (Choose three.)

• A. expiration date
• B. cisco-avpair
• C. password
• D. AAA server address
• E. user roles
• F. bind user DN
• G. user privileges

Answer: ACE