NEW QUESTION 1

A customer is planning an upgrade to their network. They need to combine multiple existing switches into one virtual device.
Which technology should the customer configure on their existing switches?

• A. Multi-chassis Link Aggregation (MLAG)
• B. Link Aggregation Control Protocol (LACP)
• C. Rapid Spanning Tree Protocol (RSTP)
• D. Intelligent Resilient Framework (IRF)

Answer: D

NEW QUESTION 2

Match each HPE solution to its optimal use case.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 3

A customer requires a storage platform for their department data. They have a limited budget and will be sharing files among their Microsoft Windows environment.
Which HPE storage platform meets the customer’s needs?

• A. Nimble
• B. StoreOnce
• C. 3PAR StoreServ
• D. StoreEasy

Answer: D

NEW QUESTION 4

A customer has two HPE ProLiant Gen10 servers. They both require firmware installation. Which HPE tool should you recommend for performing this task?

• A. OneView Advanced
• B. iLO Amplifier Pack
• C. Smart Update Manager
• D. OneView Standard

Answer: C

NEW QUESTION 5

You need to install 10 HPE ProLiant servers in an environment without DHCP. Which tool can you use to set up remote management?

• A. Intelligent Provisioning
• B. UEFI System Utilities
• C. Intelligent Management Center
• D. iLO 5 Configuration Utility

Answer: C

NEW QUESTION 6

A customer needs to virtualize their storage across physical servers and storage environments. Which HPE solution meets the customer’s needs?

• A. Nimble CS3000
• B. StoreVirtual 4335
• C. StoreVirtual VSA
• D. MSA 2050

Answer: C

NEW QUESTION 7

A customer requires a recovery strategy that provides multiple rollback points during the day for their Microsoft SQL database. The customer needs to be able to recover data instantly.
Which method meets this requirement?

• A. offsite log shipping
• B. tape copy
• C. storage replication
• D. snapshot

Answer: D

NEW QUESTION 8

A customer has requested that you provide them with an architecture and bill-of-materials for a stack of
top-ofrack switches. The customer has 34 HPE DL360 servers in the rack, each with four 1GBASE-T Ethernet ports which need to be connected to the network.
The customer is upgrading 50% of the 1GBASE-T Ethernet ports on the servers to 10GBASE-T Ethernet ports and needs the switching to support the upgraded servers. They are opposed to a chassis switch, and want to keep their number of managed devices on the network to a minimum.
Which architecture meets the customer requirements?

• A. One VSX stack of four Aruba 8320 48-port 1/10GBASE-T switches
• B. Two IRF stacks of two HPE 5710 48-port 1/10GBASE-T switches
• C. One IRF stack of four HPE 5710 48-port 1/10GBASE-T switches
• D. Two VSX stacks of two Aruba 8320 48-port 1/10GBASE-T switches

Answer: A

NEW QUESTION 9

You are creating a logical array on an HPE ProLiant server. The customer asks you to use drives with different capacities in a single array.
What should you explain to this customer?

• A. Using drives with different capacities in a single array increases the chance of disk failure
• B. The extra capacity of the larger drives will not be utilized
• C. The process to create the array will fail, and the server will not boot
• D. The RAID level will be set at RAID 0 automatically

Answer: B

NEW QUESTION 10

Refer to the exhibit.

When performing a code upgrade on an HPE Nimble array, you noticed a connection failure on ESX1. Refer to the exhibit showing the complete zoning configuration of one of the HPE SN3000B switches.
What should you do to ensure storage access is not interrupted when doing the next update?

• A. Create and ISL between the two HPE SN3000B switches.
• B. Create a new zone for ESX1 and the second storage controller.
• C. Change the timeout values on the SN3000B switch.
• D. Configure the same zone on a second HPE SN3000B.

Answer: C

NEW QUESTION 11

A customer is considering an upgrade of their networking infrastructure with HPE FlexFabric 5940 series switch.
Match the fan tray option with the airflow direction.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 12

While troubleshooting a HPE ProLiant Gen10 rack-mount server, you determine that the current and backup system ROMs are corrupt.
What should be the next step to fix the server?

• A. Restore the system firmware from a USB drive
• B. Restore the system firmware from a UEFI shell prompt
• C. Replace the CMOS battery
• D. Restore the system firmware from the iLO repository
• E. Replace the system board

Answer: E

NEW QUESTION 13

Which component of HPE iLO provides continuous monitoring of more than 1600 parameters?

• A. insight Diagnostics
• B. Active Health System
• C. Insight Remote Support
• D. Silicon root of trust

Answer: B

NEW QUESTION 14

You are validating a configuration prior to quoting it for the customer. You plan to propose the following configuration:
Two HPE DL380 Gen10 servers with dual processors, 256GB of memory, dual 10Gb NICs, SN1100Q 16Gb dual port FC HBA, dual 800W power supplies, and high temperature fan kit
HPE Nimble HF20H with 11TB storage, 960GB of cache, dual port 10GbE NIC, and 16Gb dual port FC adapter kit
Two SN3000B FC Switches
Which tool should you use to verify firmware compatibility between the storage and server components in this proposed solution?

• A. HPE NinjaSTARS
• B. HPE One Configuration Advanced
• C. HPE OneView Advanced
• D. HPE SPOCK

Answer: D

NEW QUESTION 15

Refer to the exhibit.

The information shown is displayed for a Nimble array you are installing. The customer’s administrator has asked you for the speed at which the Nimble ports are connecting to their SAN switches, and you have run the command shown to determine the number of gigabits per second used by this port connection.
What speed does the exhibit indicate is in use?

• A. 18
• B. 32
• C. 6
• D. 8

Answer: C

NEW QUESTION 16

A customer needs to verify inbound packet statistics for interface. Ten-GigabitEthernet 1/0/10 on an HPE FlexFabric 5900 series switch used by an iSCSI storage array.
Which command can be used in the CLI to perform this operation?

• A. show inbound counters port 1/0/10
• B. display counters inbound interface Ten-GigabitEthernet 1/0/10
• C. display all statistics from port 1/0/10
• D. interface Ten-GigabitEthernet 1/0/10 show counters

Answer: D

NEW QUESTION 17

A security client needs a surveillance solution to support 239 Cameras. They expect to generate 2PB of data and require a 10Gb network infrastructure in a single rack.
Which solution should you recommend to meet the customer requirements?

• A. HPE Moonshot
• B. HPE MSA
• C. HPE Apollo Servers
• D. HPE SimplVity 380

Answer: C

NEW QUESTION 18

A customer requires an entry-level, all-flash storage system with predictable performance at the lowest possible price. They have performance-sensitive workloads that require speed and efficiency.
Which HPE storage system meets the customer’s requirements?

• A. 3PAR 8450
• B. MSA 2052
• C. StoreVirtual 4335
• D. Nimble AF 1000

Answer: A

NEW QUESTION 19

A customer is considering an HPE ProLiant DL380 Gen10 server for their data center. The customer runs a large Oracle database. They need to increase performance and reduce their licensing costs.
Which feature of HPE Gen10 servers offers these benefits?

• A. workload profile matching
• B. agentless management
• C. jitter smoothing
• D. core boosting

Answer: D

NEW QUESTION 20

You are troubleshooting an HPE ProLiant rack-mount server. You need to collect event data from the server, even when it is not operational.
Which tool should you use?

• A. Insight Online
• B. InfoSight
• C. OS Event Viewer
• D. Integrated Management Log

Answer: A

NEW QUESTION 21
......