NEW QUESTION 1
A company has a single Aruba Mobility Master (MM)-based solution with two Mobility Controllers (MCs). Network administrators want APs in building 1 to support a WLAN but do not want APs in building 2 to support the WLAN.
How can administrator ensure that they can enforce this rule as they set up the WLAN in the Mobility Master (MM) Interface?

• A. Place APs in different buildings in different AP Groups.
• B. Assign APs in different buildings to different MM nodes.
• C. Configure APs in different buildings to use different frequency bands.
• D. Assign different radio profiles to APs in different buildings.

Answer: A

NEW QUESTION 2
What is a reason for a company to choose to deploy an Aruba 7024 Mobility Controller (MC) rather than an Aruba 7010 MC?

• A. to support 802.11ac Aps rather than only 802.11n APs
• B. to support more wireless users
• C. to support more POE devices directly connected to the MC
• D. to support a faster firewall throughput rate

Answer: C

NEW QUESTION 3
A network administrator creates an employee WLAN on an Aruba solution that uses WLAN
WPA2-Enterprise security and an external RADIUS server. When the administrator tests the WLAN, the test client receives limited connectivity and cannot access any resources, but the RADIUS server shows that the user authenticated successfully.
What should the administrator check as a possible source of this issue?

• A. the connectivity between the AP that the client is associated to and the MC
• B. the firewall role and policy that apply to this user
• C. the certificate on the RADIUS server
• D. the connectivity between the Master Controller (MC) for the client and the RADIUS server

Answer: B

NEW QUESTION 4
A network administrator reduces an AP radio transmit power from 18 dBm to 15 dBm. This is a loss of 3 dBms.
What is the current power as a percentage of the original power?

• A. 10%
• B. 33%
• C. 50%
• D. 83%

Answer: C

NEW QUESTION 5
Refer to the exhibits.
Exhibit 1

Exhibit 2

An Aruba solution supports a WLAN that uses WPA2-Enterprise security. Exhibit 1 shows the AAA policy for the WLAN. Users are supposed to be assigned to different roles after authentication. Network administrators test a connection with the employee user account. Exhibit 2 shows the status for the client after this test.
What is a possible reason for the issue shown in Exhibit 2?

• A. The shared key configured for the ClearPass server is incorrect.
• B. The RADIUS server is not correctly set up to send a user role for the employee account.
• C. MAC authentication is enabled on the WLAN, and the test device does not have an authorized address.
• D. The administrators entered the wrong password for the employee account.

Answer: B

NEW QUESTION 6
A company has an Aruba solution with a guest WLAN named exam_guest. A network administrator creates the guest WLAN with the wizard and does not change any of the default roles. The authentication server does not send particular role assignments for authorized users. The company wants to deny guest access to specific IP rnages after the guests authenticate.
For which role should the administrator create the rule to deny this traffic?

• A. exam_guest-guest-logon
• B. authorized
• C. guest-logon
• D. guest

Answer: D

NEW QUESTION 7
What is a requirement for the Dashboard > Traffic Analysis window on the Aruba Mobility Master (MM) to
show data?

• A. Airmatch and ClientMatch must be enabled.
• B. The solution must have active PEFNG licenses.
• C. Firewall policies must include application filtering rules.
• D. WLANs must use the decrypt-tunnel forwarding option.

Answer: B

NEW QUESTION 8
Refer to the exhibits.
Exhibit 1

Exhibit 2

A company has an Aruba Mobility Master (MM)-based solution and needs a new WLAN for the corporate campus. A network administrator completes the creation of this WLAN, as shown in Exhibit 1. When the administrator tries to test a connection to the WLAN in various locations, the WLAN sometimes shows up in the list of WLANs on the client but sometimes does not. The administrator can see the WLAN in the list, as shown in Exhibit 2.
What is the error?

• A. The Mobility Master (MM) does not have an active PEFNG license.
• B. The WLAN is configured as a hidden SSID.
• C. The configuration is not deployed to the Mobility Controller (MC).
• D. The WLAN is configured at a lower level in the Managed Network hierarchy.

Answer: D

NEW QUESTION 9
Refer to the exhibit.

Which role must AP 1 play?

• A. Remote AP (RAP)
• B. Mesh Portal AP
• C. Instant AP (IAP)
• D. Mesh Point AP

Answer: B

NEW QUESTION 10
When an Aruba solution uses AirMatch, which device generates the channel and power plan for an AP?

• A. the AirWave Management Platform
• B. the Mobility Master (MM)
• C. the Mobility Controller (MC) for the AP
• D. the AP itself

Answer: B

NEW QUESTION 11
Refer to the exhibits.
Exhibit 1

Exhibit 2

A network administrator configures a guest WLAN on an Aruba Mobility Master (MM)-based solution. The
exhibits show some of the settings for this WLAN.
Which settings must the administrator configure on each Mobility Controller (MC) at the device level for this configuration to function properly?

• A. an IPsec preshared key
• B. CPSec certificates
• C. a portal page
• D. VLAN 99 IP settings

Answer: D

NEW QUESTION 12
A company deploys a wireless network in a typical office environment with many surfaces where the signal can bounce. Which 802.11 technology uses the characteristics of this environment to increase wireless speeds?

• A. Channel bonding
• B. Multiple Input Multiple Output (MIMO)
• C. Transmit Power Control (TPC)
• D. QAM modulation

Answer: B

NEW QUESTION 13
A company has a Mobility Master (MM)-based solution. How does a Mobility Controller (MC) behave if it loses contact with all MM nodes?

• A. The MC loses all licenses and cannot support APs or clients.
• B. The MC retains its current licenses for 30 days.
• C. The MC contacts Aruba Activate and uses the licensing limits defined there.
• D. The MC maintains only licenses that have been locally installed on it.

Answer: B

NEW QUESTION 14
Refer to the exhibit.

Which role must AP1 play?

• A. Instant AP (IAP)
• B. Mesh Point AP
• C. Mesh Portal AP
• D. Remote AP (RAP)

Answer: C

NEW QUESTION 15
Which authentication server option would the network administrator choose to authenticate a wireless user directly against an Active Directory (AD) domain controller without NPS or IAS?

• A. LDAP server
• B. RFC 3576 server
• C. TACACS server
• D. RADIUS server

Answer: D

NEW QUESTION 16
An Aruba solution runs ArubaOS 8 and uses a standalone controller architecture. Which feature can administrators use to optimize the channel and power plan for the APs?

• A. ARM
• B. Rule Based Client Match
• C. AirMatch
• D. AppRF

Answer: A

NEW QUESTION 17
Which Aruba controller supports a maximum of 512 APs?

• A. Aruba 7010
• B. Aruba 7030
• C. Aruba 7210
• D. Aruba 7240

Answer: C

NEW QUESTION 18
A network administrator creates a user account on an Aruba Mobility Master (MM) with the guest-provisioning role. Which task does this user have the rights to perform?

• A. set up portal pages
• B. create guest user accounts
• C. monitor guest clients
• D. create guest WLANs

Answer: B

NEW QUESTION 19
How can network administrator provide high availability for APs deployed in an Aruba Mobility Master (MM)-based architecture?

• A. Establish clusters of Mobility Controllers (MCs).
• B. Configure MM to provide backup AP tunnel termination in case of controller failure.
• C. Deploy all licenses locally yo APs, so that they can continue to function if they lose contact with their controller.
• D. Configure APs to convert to controller-less Instant AP mode during controller failure.

Answer: A

NEW QUESTION 20
What is an advantage for a network administrator to use AirWave over a Mobility Master (MM)?

• A. ability to gather and analyze historical user data, and monitor client association and network usage trends
• B. scans wireless client settings and brings those settings in compliance with corporate security policies.
• C. ability to monitor and manage a Mobility Controller (MC) to configure the WLAN
• D. provides realtime firewall hits for client network troubleshooting

Answer: A

NEW QUESTION 21
A WLAN in an Aruba Mobility Master (MM)-based solution uses WPA2-Enterprise security. This WLAN currently authenticates users to Active Directory (AD), and users log in with their Windows domain credentials. Network administrators now want to authenticate the Windows clients as well, based on the client Computer Names.
What should the administrators do on MM to achieve this goal?

• A. Set up Machine Authentication on the WLAN.
• B. Set up Mac Authentication on the WLAN.
• C. Bind individual Mobility Controllers (MCs) to AD at the device level.
• D. Import the computer names from AD to the MM internal database.

Answer: A

NEW QUESTION 22
Which APs operate in an autonomous or standalone mode?

• A. remote APs (RAPs)
• B. spectrum analyzers (SAs)
• C. mesh points (APs)
• D. instant AP (IAP) clusters

Answer: D

NEW QUESTION 23
......