NEW QUESTION 1
Using a two-port FLM, what is the minimum number of frames needed to implement a solution that includes redundant Composers and Image Streamers?

• A. 1
• B. 2
• C. 3
• D. 4

Answer: C

NEW QUESTION 2
Which HPE Synergy D3940 storage module configuration is valid?

• A. a single RAID set to be shared across the SAS fabric to multiple compute nodes as a virtualization host datastore
• B. maximum of three HPE Synergy D3940 storage modules per frame to be used by any compute module within the management ring
• C. any number of the drives from storage module to be mapped to any single compute node
• D. a pair of disks to house Composer backups and Synergy firmware bundles

Answer: A

NEW QUESTION 3
Refer to the exhibit.

A Synergy integrator needs to establish the module cluster links between two master modules, as shown. Which ports can the integrator use for the module cluster links?

• A. 1 and 2
• B. 3 and 4
• C. 5 and 6
• D. 7 and 8

Answer: D

Explanation:
References:
https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00017673en_us&docLocale=en_US (15)

NEW QUESTION 4
Refer to the exhibit.

A customer with the design shown needs to perform an in-place upgrade to its environment to scale the two-frame single homed Multimodule Link Aggregation Group (MLAG) configuration to a three-frame
configuration. The new frame needs to provide a redundant 20Gb connection for the compute module ports in Fabric 3.
Which interconnect modules should the integrator use in Frame 3?

• A. HPE Virtual Connect SE 40Gb F8 module in bay 3 and HPE Virtual Connect SE 40Gb F8 Module in bay 6
• B. HPE Synergy 10Gb Interconnect Link Module in bay 3 and HPE Synergy 10Gb Interconnect Link Module in bay 6
• C. HPE Synergy 20Gb Interconnect Link Module in bay 3 and HPE Synergy 20Gb Interconnect Link Module in bay 6
• D. HPE Synergy 20Gb Interconnect Link Module in bay 3 and HPE Synergy 10Gb Interconnect Link Module in bay 6

Answer: B

NEW QUESTION 5
Refer to the exhibit.

A customer has an HPE Synergy 2-frame configuration, as shown. The customer has a new project and needs to increase the number of compute modules.
What is the maximum number of compute nodes that the customer’s fabric could support?

• A. 24
• B. 36
• C. 48
• D. 60

Answer: D

NEW QUESTION 6
Which management tool required by HPE Infosight must be deployed at the customer site?

• A. HPE Global Dashboard
• B. HPE OneView
• C. HPE iLO Amplifier
• D. HPE StoreServ Management Console (SSMC)

Answer: C

NEW QUESTION 7
What is the purpose of the OmniStack Accelerator card installed in HPE SimpliVity platform?

• A. It performs inline data efficiency processing and deduplication
• B. It provides very fast SSD capacity for demanding workloads
• C. It provides graphic acceleration for VDI infrastructure
• D. It accelerates CPU processing within a virtual machine

Answer: B

Explanation:
References:
https://assets.ext.hpe.com/is/content/hpedam/documents/a00026000-6999/a00026728/a00026728enw.pdf

NEW QUESTION 8
A customer needs to significantly improve I/O performance to a database server.
Which product should an integrator implement as part of a Synergy composable solution?

• A. HPE Synergy D3940 storage module with SSD drives
• B. HPE Composer with NVMe drives
• C. HPE Synergy compute module with a Tesla accelerator
• D. HPE Synergy Image Streamer

Answer: A

NEW QUESTION 9
A customer needs to expand a single-frame Synergy solution to two frames.
What should the integrator do to establish a proper management network for the two frames?

• A. Connect the RJ-45 management ports of the Virtual Connect modules together with redundant CAT6Acables.
• B. Disconnect the existing management ring, and cable the Frame Link Modules in the first frame to the Frame Link Modules in the added frame.
• C. Connect the RJ-45 front panel connectors on the two frames together with a single CAT6A cable.
• D. In the Synergy console, select the Frame Link Modules in the new frame and define the connection between them.

Answer: D

NEW QUESTION 10
An integrator prepares deployment documents with the list of all the hardware and software components. The integrator also needs a list of all infrastructure services deployed, with the functionality described.
Which services are provided by the vCenter Server component and should be placed in the report? (Choose two.)

• A. Auto Deploy
• B. Single Sign-On
• C. Update Manager
• D. Lookup Service
• E. Certificate Authority

Answer: CD

NEW QUESTION 11
A customer needs to upgrade an HPE Synergy 12000 frame with an HPE Virtual Connect SE 32Gb Fibre Channel (FC) Module.
Which steps must the integrator take to install the upgrade?

• A. Modify the Synergy 40Gb F8 Logical Interconnect Group (LIG), and add the FC uplink set and storage networks.
• B. Create one redundant Logical Interconnect Group (LIG) with two uplink sets, one for SAN-A and one for SAN-B.
• C. Create two new Logical Interconnect Groups (LIGs) that are non-redundant Side-A/Side-B, one for SAN-A and one for SAN-B.
• D. Edit the Enclosure Group and specify HPE Virtual Connect SE 32Gb FC Module in interconnect bays 1 and 2.

Answer: A

NEW QUESTION 12
Refer to the exhibit.

How should an integrator pair interconnect bays to set up redundant fabrics in an HPE Synergy 12000 Frame?

• A. Interconnect bays 1 and 2; bays 3 and 4; bays 5 and 6.
• B. Interconnect bays 1 and 6; bays 2 and 5; bays 3 and 4.
• C. Interconnect bays 1 and 4; bays 2 and 5; bays 3 and 6.
• D. Interconnect bays 1 and 3; bays 2 and 4; bays 5 and 6.

Answer: C

NEW QUESTION 13
Which operating systems are supported for use with Image Streamer? (Choose two.)

• A. VMware ESXi 6.7
• B. CentOS 7.2
• C. SUSE Linux Enterprise Server 11
• D. Windows Hyper-V 2021
• E. Red Hat Enterprise Linux 7.3

Answer: DE

Explanation:
References:
https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00061945en_us&docLocale=en_US

NEW QUESTION 14
A customer needs to evaluate Image Streamer as Proof-of-Concept (PoC) in a test and development tab environment.
At a minimum, what does a Synergy integrator need in order to support this requirement?

• A. a three-frame environment with redundant composer and Image Streamer appliances
• B. a single frame with single composer and Image Streamer appliances
• C. a two-frame environment with single composer and Image Streamer appliances
• D. a single frame with redundant Image Streamer appliances

Answer: B

NEW QUESTION 15
A customer has a datacenter with 3-frame Master/Satellite Synergy solution. They plan to add two additional frames to the remote datacenter, but they want to have a single management tool.
How should the integrator set up the management of the datacenter?

• A. Add two frames from the remote datacenter as remote enclosures using existing Composer
• B. Install one Composer in every frame in both local and remote datacenter
• C. Deploy one Composer in each site and link them together
• D. Connect the management links with fibre cables if the distance between datacenters is more than 500m

Answer: A

NEW QUESTION 16
A customer needs to attach 20 HPE 1 TB SATA 6G SFF hard drives to an HPE Synergy 480 Gen10 compute module.
Which HPE products are necessary to meet the requirements? (Choose three.)

• A. HPE D3940 storage module
• B. HPE Synergy 12Gb SAS Connection Module
• C. HPE 10GbE SynergyPass-Thru Module
• D. HPE Smart Array P416ie-m Controller
• E. HPE Smart Array P542D Controller

Answer: BDE

NEW QUESTION 17
Which component must be deployed at the customer site and is essential for HPE InfoSight for Servers?

• A. HPE Intelligent Provisioning
• B. HPE Global Dashboard
• C. iLO Amplifier Pack
• D. HPE Composer

Answer: C

Explanation:
References: https://www.slideshare.net/Xylos/hpe-infosight-for-servers

NEW QUESTION 18
A customer is planning to deploy OneView for vCenter Server to improve management procedures for growing virtualization environment. The customer is concerned about resources required by HPE OneView for vCenter Server.
Which statement about deploying HPE OneView for vCenter Server is true?

• A. It is deployed as an application on the Windows Server machine with at least 48GB of memory.
• B. It is deployed as a part of the HPE Composer installation.
• C. It is deployed as a virtual machine on the supported hypervisor.
• D. It can only be deployed if HPE Global Dashboard is already installed.

Answer: C

NEW QUESTION 19
A customer requires all automated Fibre Channel zones to have a prefix of “SYNERGY” in the automatically-generated zones.
Click where the integrator should change the naming policy.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 20
Match each HPE server platform with optimal workload.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 21
Using SSMC, an integrator has added a new CPG on the HPE 3PAR StoreServ array integrated with HPE Composer.
The new CPG is not visible in the HPE Composer.
What must the integrator do to see the new CPG in the HPE Composer console?

• A. Run the discovery process on the 3PAR StoreServ array from the SSMC interface.
• B. Add the CPG using the HPE Composer interface.
• C. Add the CPG to the Storage Components scope using the SSMC interface.
• D. Run the refresh procedure on the 3PAR StoreServ array from HPE Composer

Answer: D

NEW QUESTION 22
A customer is considering implementing a DRS cluster, but they would like to know how DRS can help to achieve performance goals.
How should an integrator respond?

• A. When powering on a virtual machine, a DRS cluster can automatically place it on the optimal host.
• B. Selected virtual machines will be assigned higher priority when the amount of physical resources will drop below a specific level.
• C. A DRS cluster will migrate a virtual machine to a different host when available network bandwidth will drop below a specific level.
• D. If more than 50 virtual machines will be running on a single host, DRS cluster will configure CPU affinity to proportional resource allocation.

Answer: B

NEW QUESTION 23
Which tool should an integrator use to determine the power requirements of an HPE Synergy solution?

• A. HPE Product Bulletin
• B. HPE SalesBuilder for Windows
• C. HPE Synergy Planning Tool
• D. HPE SPOCK

Answer: C

NEW QUESTION 24
......