NEW QUESTION 1
A DHCP Unique Identifier (DUID) in DHCPv6 can be configured in VRP using which formats?(Choose two).

• A. DUID-LL
• B. DUID-LLT
• C. DUID-EN
• D. DUID-LLC

Answer: AB

NEW QUESTION 2
Which of the following steps are necessary to configure OSPF on a Huawei router?(Choose three)

• A. Configuration of a router ID
• B. Enabling of an OSPF process
• C. Specifying an OSPF area
• D. Configuration of the network segments within each area

Answer: BCD

NEW QUESTION 3
A user logged into a VRP supported device through telnet, but when attempting to
configure the device, foundthat he is unable to use the sytem-view command to enter the system-view. What are the possible reasons forthis?(Choose two)

• A. The device’s VTY interface only provides permission for some telnet users to run the sytem-view command.
• B. The user’s telnet software restricts use of this command.
• C. The user’s privilege level is lower than the level associated with the system-view command.
• D. The system-view command privilege level is lower than the level associated with the user.

Answer: AC

NEW QUESTION 4
Which of following may be the reasons that cause Frame Relay PVC to work abnormally?(Choose three)

• A. Same DLCI number is configured on the same router
• B. LMI type mismatch
• C. Frame Relay encapsulation type mismatch
• D. Incorrect configuration of the DLCI number

Answer: BCD

NEW QUESTION 5
Which of the following statements explains the behavior of the ICMP redirect function?(Choose two)

• A. When a router receives data on the interface via which the same data needs to be forwarded, and thesource is on the same segment as the next hop, an ICMP redirect message will be sent by the router to thesource.
• B. When a router receives data on an interface, and the router’s IP address matches the destination IP of thedata, an ICMP redirect message will be sent by the router to the source.
• C. When a router receives data on the interface via which the same data needs to be forwarded, and thesource is on the same segment as the next hop, an ICMP Redirect message will be sent by the source tothe router.
• D. When a router receives data on the interface via which the same data needs to be forwarded, and thesource is on a different segment from the next hop, an ICMP redirect message will be sent by the router tothe source

Answer: AD

NEW QUESTION 6
On the VRP platform, which of the following commands is used to configure the Router ID of a router as
1.1.1.1?

• A. <Huawei>router id 1.1.1.1
• B. [Huawei]router id 1.1.1.1
• C. [Huawei]router-id 1.1.1.1
• D. [Huawei]router id 1.1.1.1 255.255.255.255

Answer: B

NEW QUESTION 7
In a small network suppporting IPv6, a network administrator wishes implement RIPng. Which of the followingcommands should be used to enable this protocol?

• A. [RTA-GigabitEthernet0/0/0]ripng 1 enable
• B. [RTA]ripng 1 enable
• C. <RTA>ripng 1 enable
• D. [RTA-ripng-1]ripng 1 enable

Answer: A

NEW QUESTION 8
Refer to the graphic. The link between RTA and RTB is encapsulated using PPP. The IP addresses of serial1/0/1 of RTA and serial 1/0/1 of RTB are in different network segments. Which following is correct? (Choose two)

• A. RTA can ping 10.1.1.2 successfully
• B. RTA cannot ping 10.1.1.2
• C. The route entry 10.1.1.0/24 exists in the routing-table of RTA
• D. The route entry 10.1.1.2/32 exists in the routing-table of RTA

Answer: AD

NEW QUESTION 9
Refer to the graphic. Host A is located in a private network. It is required that Host A not only be capable ofrouting traffic over the public network, but also that public users are able to actively communicate with Host A.
Which NAT translation method should be configured on the gateway?

• A. Static NAT
• B. Dynamic NAT
• C. Easy-IP
• D. NAPT

Answer: A

NEW QUESTION 10
Which of the following storage devices is used to store the startup configuration files in a router?
<choice ident="A">
<choice ident="B">
<choice ident="C">
<choice ident="D">

• A. SDRAM
• B. NVRAM
• C. Flash
• D. BootROM

Answer: B

NEW QUESTION 11
A host has established a telnet connection with the router attached to interface G0/0/0. Which of the followingstatements are correct?(Choose two)

• A. The destination address of a frame sent by the host will be the MAC address of the router interface.
• B. The destination address of a frame will be the MAC address of the switch interface.
• C. The destination port number in a segment header will have a value of 80.
• D. The destination IP address of a packet will be the IP address of the network interface of the router.

Answer: AD

NEW QUESTION 12
An administrator currently manages AR2200 devices in the network through a single password, however thecompany wishes to introduce another two administrators and provide unique user credentials and privilegelevels for telnet access to the network devices. What action can be taken?(Choose three)

• A. Configure three users under the AAA-view, and assign each a different password.
• B. The authentication mode must be changed to AAA.
• C. Each administrator must be assigned a privilege level.
• D. A public IP address must be assigned to each user for telnet access

Answer: ABC

NEW QUESTION 13
When configuring a router as a PPPoE client, which configuration is not necessary?

• A. Configuration of the dialer-rule
• B. Configuration of the dialer interface
• C. Configuration of an IP address on the dialer interface
• D. Configuration of a password on the dialer interface

Answer: C

NEW QUESTION 14
Which of the following commands is used to display the current running state and configuration of RIP?

• A. display protocol rip
• B. show rip
• C. display rip
• D. display this rip

Answer: C

NEW QUESTION 15
Which of the following statements regarding the routing table are correct?(Choose two)

• A. The next hop in the routing table is redundant because the outgoing interface can be used for packetforwarding.
• B. The routes from generated by different protocols have different preferences.
• C. The metrics of different routing protocols are comparable.
• D. The metrics of different routing protocols are not comparable

Answer: BD

NEW QUESTION 16
A configured internal host of a private network wishes to access the internet. What must be
configured on theenterprise network’s edge router in order to achieve this?(Choose two)

• A. NAT EasyIP
• B. DHCP
• C. BGP
• D. Default route

Answer: AD

NEW QUESTION 17
Refer to the graphic. Two switches have been connected as shown and both support STP. The administratorhas configured switch A as a DHCP server and set interface VLANIF1 of switch B to obtain an IP address fromswitch A. A link failure occurs on port interface G0/0/1 of switch B. What action will occur as a result?

• A. The two switches will be unable to communicate.
• B. Switch B will send a DHCP Discovery message to obtain a new IP address.
• C. Swich B will continue to use the IP address obtained from Switch A
• D. Switch B will send a DHCP Release message to release the IP address.

Answer: C

NEW QUESTION 18
Refer to the graphic. The network administrator wishes to aggregate the two links as member interfaces of Ethtrunk
Which statement is correct?

• A. The interfaces will be aggregated with load balancing.
• B. The interfaces will be aggregated, but only interface GE0/0/1 will send data flow.
• C. The interfaces will be aggregated, but the Eth-trunk will not be active.
• D. The interfaces cannot be aggregated.

Answer: D

NEW QUESTION 19
Refer to the graphic. Two hosts communicate through a GRE tunnel. When the GRE tunnel is up, the networkadministrator configures a static route on RTA to route packets to Host B. Which of the following commandswill achieve this?

• A. ip route-static 10.1.2.0 24 GigabitEthernet0/0/1
• B. ip route-static 10.1.2.0 24 200.2.2.1
• C. ip route-static 10.1.2.0 24 200.1.1.1
• D. ip route-static 10.1.2.0 24 tunnel 0/0/1

Answer: D