100-105 Exam Questions - Online Test

100-105 Premium VCE File

Learn More 100% Pass Guarantee - Dumps Verified - Instant Download
150 Lectures, 20 Hours

Pass4sure offers free demo for icnd1 100 105 exam. "ICND1 Cisco Interconnecting Cisco Networking Devices Part 1 (ICND1 v3.0)", also known as ccna 100 105 pdf exam, is a Cisco Certification. This set of posts, Passing the Cisco 100 105 icnd1 pdf exam, will help you answer those questions. The icnd1 100 105 pdf Questions & Answers covers all the knowledge points of the real exam. 100% real Cisco icnd1 100 105 pdf exams and revised by experts!

P.S. Actual 100-105 preparation exams are available on Google Drive, GET MORE: https://drive.google.com/open?id=16T0cVE2WYz-0Y7Wh56_Fr0zWNJ4X7B2X

New Cisco 100-105 Exam Dumps Collection (Question 3 - Question 12)

Question No: 3

Refer to the exhibit.

A network technician is unable to ping from R1 to R2. What will help correct the problem?

A. Ensure that the serial cable is correctly plugged in to the interfaces.

B. Apply the clock rate 56000 configuration command to the serial0/1 interface of R1.

C. Configure the serial0/1 interfaces on R1 and R2 with the no shutdown command.

D. Change the address of the serial0/1 interface of R1 to 192.1.1.4.

E. Change the subnet masks of both interfaces to 255.255.255.240.

Answer: A

Question No: 4

Which statement about static routes is true?

A. The source interface can be configured to make routing decisions.

B. A subnet mask is entered for the next-hop address.

C. The subnet mask is 255.255 255.0 by default

D. The exit interface can be specified to indicate where the packets will be routed.

Answer: D

Explanation:

Static routing can be used to define an exit point from a router when no other routes are available or necessary. This is called a default route.

Question No: 5

Refer to the exhibit. Which feature is enabled by this configuration?

A. static NAT translation

B. a DHCP pool

C. a dynamic NAT address pool

D. PAT

Answer: C

Question No: 6

By default, how many MAC addresses are permitted to be learned on a switch port with port security enabled?

A. 8

B. 2

C. 1

D. 0

Answer: C

Question No: 7

How does a Layer 2 switch differ from a hub?

A. A switch tracks MAC addresses of directly-connected devices.

B. A switch always induces latency into the frame transfer time.

C. A switch operates at a lower, more efficient layer of the OSI model.

D. A switchdecreases the number of collision domains.

Answer: A

Question No: 8

Refer to the exhibit. The network administrator must complete the connection between the RTA of the XYZ Company and the service provider. To accomplish this task, which two devices could be installed at the customer site to provide a connection through the local loop to the central office of the provider? (Choose two.)

A. WAN switch

B. PVC

C. ATM switch

D. multiplexer

E. CSU/DSU

F. modem

Answer: E,F

Question No: 9

Which set of conditions comprises a successful ping attempt between two connected routers configured with IP addresses on the same subnet?

A. The destination host receives an echo reply from the source host within one second and the source host receives an echo request from the destination host.

B. The destination host receives an echo request from the source host within one second.

C. The destination host receives an echo reply from the source host within one second and the source host receives an echo reply from the destination host within two seconds.

D. The destination host receives an echo request from the source host and the source host receives an echo request from the destination host within one second.

E. The destination host receives an echo request from the source host and the source host receives an echo reply from the destination host within two seconds.

Answer: C

Question No: 10

Scenario:

You work for a company that provides managed network services, and of your real estate clients running a small office is experiencing network issues, Troubleshoot the network issues.

Router R1 connects the main office to internet, and routers R2 and R3 are internal routers NAT is enabled on Router R1.

The routing protocol that is enable between routers R1, R2, and R3 is RIPv2.

R1 sends default route into RIPv2 for internal routers to forward internet traffic to R1. Server1 and Server2 are placed in VLAN 100 and 200 respectively, and dare still running

router on stick configuration with router R2.

You have console access on R1, R2, R3, and L2SW1 devices. Use only show commands to troubleshoot the issues.

What is the correct statement below after examining the R1 routing table?

A. Traffic that is destined to 10.10.10.0/24 from R1 LAN network uses static route instead RIPv2 Because the static route AD that is configured is less than the AD of RIPv2

B. Traffic that is destined to 10.10.10.0/24 from R1 LAN network uses RIPv2 instead static

route Because the static route AD that is configured is higher than the AD of RIPv2

C. Traffic that is destined to 10.10.10.0/24 from R1 LAN network uses static route instead RIPv2 But the traffic is forwarded to the ISP instead of the internal network.

D. Traffic that is destined to 10.10.10.0/24 from R1 LAN network uses RIPv2 instead static route Because the static route AD that is configured is 255

Answer: B

Explanation:

Configuration are below for the answer.

Question No: 11

CORRECT TEXTHow do you bypass password on cisco device?

Answer:

Change the configuration register to 0x2142. With this setting when that router reboots, it bypasses the startup-config and no password is required.

Question No: 12

Which information is used to install the best route to a destination in IP routing table?

A. the tunnel ID

B. the prefix length

C. the interface number

D. the autonomous system

Answer: B

Recommend!! Get the Actual 100-105 dumps in VCE and PDF From Certifytools, Welcome to download: https://www.certifytools.com/100-105-exam.html (New 347 Q&As Version)