7003 Exam Questions - Online Test

7003 Premium VCE File

Learn More 100% Pass Guarantee - Dumps Verified - Instant Download
150 Lectures, 20 Hours

Our pass rate is high to 98.9% and the similarity percentage between our 7003 study guide and real exam is 90% based on our seven-year educating experience. Do you want achievements in the Avaya 7003 exam in just one try? I am currently studying for the Avaya 7003 exam. Latest Avaya 7003 Test exam practice questions and answers, Try Avaya 7003 Brain Dumps First.

New Avaya 7003 Exam Dumps Collection (Question 2 - Question 11)

New Questions 2

A technician is planning on upgrade of an option 11C 5 x system to a Communication Server (CS) 1000E Rls. 7 x System with CPMG Co-resident Call server and Media Gateway Controller.

To perform the Linux Base software installation on the CPMG which component is required?

A. Bootable Compact Flash (1 Gigabyte)

B. Bootable USB drive/disk (2 Gigabyte)

C. External CDROM drive

D. Bootable Compact Flash (2 Gigabyte)

Answer: B

New Questions 3

Upon accessing Subscriber Manager, you discover that the Subscriber Manager database does not accurately reflect all the telephones managed under the Subscriber Manager database.

Which Subscriber Manager operation is required to update the Subscriber Manager database with the communication Server 1000 telephones?

A. Account Synchronization

B. LDAP Synchronization

C. Publish Accounts

D. CSV Subscriber Synchronization

Answer: A

New Questions 4

A customer with a Communication Server (CS) 1000Rls. 6.0 SA is upgrading to Release

7.0. They have decided to replace the existing CPPM Call server CPPM Signaling Server with a CPPM Co-Resident Call Server, Signaling Server and Gateway Controller to free up a two card slots. A technician has decided to use the ELAN IP of the Call Server from the original system as the ELAN IP address of the Co-Resident server.

Which action must be taken to consolidate the servers?

A. Re-configure the Call Server IP address field in each Media gateway Controller

B. Re-configure the Telephony Node Information to reflect the Call Server ELAN IP

C. Re-configure the DSP Daughterbaords to reflect Call Server ELAN IP.

D. Re-configure the network Routing Service to reflect the Call Server ELAN IP address.

Answer: A

New Questions 5

A technician has deployed a Communication Server 1000 Rls. 7x system at their site. You are using the Virtual Terminal to access Communication Command line interface (CLI) to add telephone.

Which Overlays (LDs) are linked to eliminate the need for existing one Overlay (LD) and entering another one?

A. LD 10, 11, 15 and 20

B. LD 10, 11, 20 and 32

C. LD 10, 11, 20 and 30

D. LD 20 and 32

Answer: B

New Questions 6

Your customer has requested you add the Call Park Feature to their Communication Server 1000 Release 7x system. You have been asked to assign at least eight consecutive numbers that can be used to park calls.

Which CLI overlay and command will provide you with numbers that are unassigned and available?

A. LD 20 / REQ / LUC

B. LD 20 / REQ / LUDN

C. LD 20 / REQ / LUU

D. LD 20 / REQ / LUVU

Answer: B

New Questions 7

You are installing a new Communication Server 1000E (CS 1000E) SA release 7x system for your customer. They have asked you to implement the corporate Directory Feature during the installation.

A. SFTP must be disabled in LD 117.

B. Valid telephony accounts must already exist in Subscriber Manager.

C. The CS 1000E Call Server must be joined to security domain.

D. Centralized authentication must be disabled.

Answer: C

New Questions 8

A field calls about a problem enabling the DSPs on a new Communication Server (CS) 1000E SA Co-resident on release 7x. The DSPs on the MG 1 are all enabled but enabling the DSPs on MG2 and MG3 fail, and asked that the configuration be reviewed.

MG1: CPMG 128

MG2: MGC 128 DSP DB in position 2

MG3: MGC 128 DSP DB in position 2

After reviewing the configuration, an error in the DSP 128 VGW (DSP) configuration is identified?

Which configuration option accurately reflects the proper configuration for the voice Gateway (DSP) channel?

A. Numbering of VGW channels: 128 Trunk data block VGW

Terminal number: 004 0 02 0 Designator field for trunk: DSP Extended trunk DSP DB 128 Customer number: 00

B. Numbering of VGW channels: 128 Trunk data block VGW

Terminal number: 004 0 01 0 Designator field for trunk: DSP Extended trunk DSP DB 128 Customer number: 00

C. Numbering of VGW channels: 128 Trunk data block VGW

Terminal number: 004 0 00 0 Designator field for trunk: DSP Extended trunk DSP DB 128

Customer number: 00

D. Numbering of VGW channels: 128 Trunk data block VGW

Terminal number: 004 0 11 0 Designator field for trunk: DSP Extended trunk DSP DB 128 Customer number: 00

Answer: D

New Questions 9

A technician is planning an upgrade for a customeru2021s Communication Server (CS) 1000E Release 6.0 system to Release 7x.

Which two features are now to the Release 7x Deployment manager? (Choose two)

A. Pre-configuration Remote Installation

B. Auto-select servers to which applications can be deployed

C. One-Touch System Upgrade

D. Auto-Select of the correct application file

Answer: A,C

New Questions 10

A customer has completed the installation of the Communication Server (CS) 1000E Rls. 7 x system and wants to access Base Manager to configure and provision the Linux Base.

Which two actions are true regarding access Base manager? (Choose two)

A. Base Manager is accessible from the UCM element list

B. Base Manager is accessible from Deployment Manager

C. Base Manager is accessible via centralized login for standalone Linux servers

D. Base Manager is accessible on every server with Linux Base in or out of a security domain

Answer: A,C

New Questions 11

A customer has a Communication Server (CS) 1000 Rls. 7x Co-Resident system with a Media Gateway Controller and Media Cards and has completed the configuration of all elements and they are all active and known to the Call Server. The customer wants to add all the elements to the Security Domain.

Which Overlay 117 commands used to add the element to the Security Domain?

A. JoinSecDomain

B. Join ucmSecurity element

C. Register ucmsecurity device

D. Register ucmSecurity system

Answer: D

Recommend!! Get the Top Quality 7003 dumps in VCE and PDF From Thedumpscentre, Welcome to download: http://www.thedumpscentre.com/7003-dumps/ (New Q&As Version)