NEW QUESTION 1
You have a server named Server1 that runs Windows Server 2021. Server1 is an IP Address Management (IPAM) server that collects DHCP and DNS logs and events for your entire network.
You need to get the IP addresses that were assigned to a client computer named Computer1 during the last week.
What should you do on Server1?

• A. Open Event Viewer and click Windows Log
• B. Filter the Security log for Computer1.
• C. From the IPAM node in Server Manager, click Event Catalog, and then review the IP Address Tracking.
• D. Run the Get-IpamDhcpConfigurationEvent cmdlet.
• E. Open Event Viewer and click Windows Log
• F. Filter the Forwarded Events log for Computer1.

Answer: C

Explanation: References:
https://docs.microsoft.com/en-us/powershell/module/ipamserver/get-ipamipaddressauditevent?view=win10-ps

NEW QUESTION 2
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a server named Server1 that has the Network Policy and Access Services server role installed. You create a Shared Secret Network Policy Server (NPS) template named Template1.
You need to view the shared secret string used for Template1.
Solution: From Windows PowerShell, you run Get-NpsSharedSecretTemplate -Name Template1.
Does this meet the goal?

• A. Yes
• B. No

Answer: B

NEW QUESTION 3
You have a Hyper-V host named Server1 that runs Windows Server 2021. Server1 has two network adaptors named NK1 and NIC2. Server2 has two virtual switches named vSwitch1 and vSwitch2. N1C1 connects to vSwitch1. NIC2 connects to vSwitch2
Server1 hosts a virtual machine named VM1. VM1 has two network adapters named vmNIC1 and vmNIC1. VmNIC1 connects to vSwitch1. VmNIC2 connects to vSwitch2.
You need to create a NIC team on VM1.
What should you run on VM1? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

Answer:

Explanation: Name NICTEAM1 TeamMembers vmNIC1, vmNIC2 –TeamingMode $var1 –LoadBalancingAlgorithm $var2

NEW QUESTION 4
You have a network policy server (NPS) server named NPS1. One network policy is enabled on NPS1. The policy is configured as shown in the following exhibit.

Use the drop-down menus to select the answer choice that completes each statement based on the information in the graphic.

Answer:

Explanation:

NEW QUESTION 5
Your network contains an Active Directory domain named contoso.com. The domain contains a member server named Server1 that runs Windows Server 2021.
You install IP Address Management (IPAM) on Server1. You select the automatic provisioning method, and then you specify a prefix of IPAM1.
Which cmdlet should you run? To answer, select the appropriate options in the answer area.

Answer:

Explanation: Invoke-IpamGpoProvisioning –Domain contoso.com –GpoPrefixName IPAM –IpamServerFqdn dc1.contoso.com

NEW QUESTION 6
You have a server named Server1 that runs Windows Server 2021.
You need to deploy the first node cluster of a Network Controller cluster.
Which four cmdlets should you run in sequence? To answer, move the appropriate cmdlets from the list of cmdlets to answer area and arrange them in the correct order.

Answer:

Explanation:

NEW QUESTION 7
You have a DHCP server named Server1.
Server1 has an IPv4 scope that contains 100 addresses for a subnet named Subnet! Subnet1 provides guest access to the Internet. There are never more than 20 client computers on Subnet1 simultaneously; however, the computers that connect to Subnet 1 are rarely the same computers.
You discover that some client computers are unable to access the network. The computers that have the issue have IP addresses in the range of 169.254.0.0/16.
You need to ensure that all of the computers can connect successfully to the network to access the Internet. What should you do?

• A. Create a new scope that uses IP addresses in the range of 169.254.0.0/16.
• B. Modify the scope options.
• C. Modify the lease duration.
• D. Configure Network Access Protection (NAP) integration on the existing scope.

Answer: C

NEW QUESTION 8
Your network contains an Active Directory domain named contoso.com that contains a domain controller named DC1. All DNS servers for the network run BIND 10.
Your perimeter network contains a DHCP server named DHCP1 that runs Windows Server 2021. DHCP1 is a member of a workgroup named WORKGROUP. DHCP1 provides IP address leases to guests accessing the Wi-Fi network.
Several engineers access the network remotely by using a VPN connection to a remote access server that runs Windows Server 2021. All of the VPN connections use certificate-based authentication and are subject to access policies in Network Policy Server (NPS). Certificates are issued by an enterprise certification authority (CA) named CA1.
All Windows computers on the network are activated by using Key Management Service (KMS). On-premises users use Remote Desktop Services (RDS).
You plan to deploy IP Address Management (IPAM) to the network. Which action can you perform on the network by using IPAM?

• A. Manage the DNS zones on the DNS servers.
• B. Audit logon events on the RDS server.
• C. Audit authentication events from DC1.
• D. Manage activations on the KMS server.

Answer: C

NEW QUESTION 9
You run Get-NetIPAddress and receive the output shown in the following exhibit:

Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:

NEW QUESTION 10
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a Hyper-V host named Server 1. The network adapters on Server1 have single root I/O virtualization (SR-IOV) enabled.
Server1 hosts a virtual machine named VM1 that runs Windows Server 2021. You need to identify whether SR-IOV is used by VM1.
Solution: On Server1, you open Hyper-V Manager and view the Integration Services settings of VM1.
Does this meet the goal?

• A. Yes
• B. No

Answer: B

NEW QUESTION 11
You have a DNS server named Server1.
The forwarders are configured as shown in the Forwarders exhibit. (Click the Exhibit button.)

The Advanced Settings are configured as shown in the Advanced exhibit. (Click the Exhibit button.)

The Root Hints are configured as shown in the Root Hints exhibit. (Click the Exhibit button.)

Server1 does not contain any DNS zones.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.

Answer:

Explanation: Recursion is disabled so internet hosts cannot be resolved. The recursive test fails because recursion is disabled.
Server1 is not configured as a root server. The forwarders list would be greyed out if it was.

NEW QUESTION 12
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You network contains an Active Directory domain named contoso.com. The domain contains a member server named Server1 that runs Windows Server 2021 and has the DNS Server role installed. Automatic scavenging of state records is enabled and the scavenging period is set to 10 days.
All client computers dynamically register their names in the contoso.com DNS zone on Server1.
You discover that the names of multiple client computers that were removed from the network several weeks ago can still be resolved.
You need to configure Server1 to automatically remove the records of the client computers that have been offline for more than 10 days.
Solution: You modify the Zone Aging/Scavenging properties of the zone. Does this meet the goal?

• A. Yes
• B. No

Answer: A

Explanation: https://technet.microsoft.com/en-us/library/cc771362(v=ws.10).aspx

NEW QUESTION 13
You are implementing a new network. The network contains a DHCP server named DHCP1 that runs Windows Server 2021. DHCP1 contains a scope named Scope1 for the 192.168.0/24 subnet.
Your company has the following policy for allocating IP addresses:
All server addresses must be excluded from DHCP scopes.
All client computer must receive IP addresses from Scope1.
All Windows servers must have IP addresses in the range of 192.168.0.200 to 192.168.0.240
All other network devices must have IP addresses in the range of 192.168.0.180 to 192.168.0.199. You deploy a print device named Print1.
You need to ensure that Print1 adheres to the policy for allocating IP addresses. Which command should you use?

• A. Add-DhcpServerv4Lease
• B. Add-DhcpServerv4ExclusionRange
• C. Add-DhcpServerv4Filter
• D. Add-DhcpServerv4Reservation

Answer: D

NEW QUESTION 14
You have a server named Server1 that runs Windows Server 2021.
You need to deploy the first cluster node of a Network Controller cluster.
Which four cmdlets should you run in sequence? To answer, move the appropriate cmdlets from the list of cmdlets to the answer area and arrange them in the correct order.

Answer:

Explanation: Deploy Network Controller using Windows PowerShell Step 1: Install-WindowsFeature
Install the Network Controller server role
To install Network Controller by using Windows PowerShell, type the following commands at a Windows PowerShell prompt, and then press ENTER.
Install-WindowsFeature -Name NetworkController –IncludeManagementTools Step 2: New-NetworkControllerNodeObject
You can create a Network Controller cluster by creating a node object andthen configuring the cluster.
You need to create a node object for each computer or VM that is a member of the Network Controller cluster.
Tocreate a node object, type the following command at the Windows PowerShell command prompt, and then press ENTER. Ensure that you add values for each parameter that are appropriate for your deployment.
New-NetworkControllerNodeObject –Name <string> -Server<String> -FaultDomain <string>-RestInte Step 3: Install-NetworkControllerCluster
To configure the cluster, typethe following command at the Windows PowerShell command prompt, and then press ENTER. Ensure that you add values for each parameter that are appropriate for your deployment.
Install-NetworkControllerCluster –Node <NetworkControllerNode[]>–ClusterAuthentication … Step 4: Install-NetworkController
To configure the Network Controller application, type the following command at the Windows PowerShell command prompt, and then press ENTER. Ensure that you add values for each parameter that are appropriate for your deployment.
Install-NetworkController –Node <NetworkControllerNode[]> –ClientAuthentication References: https://technet.microsoft.com/en-us/library/mt282165.aspx

NEW QUESTION 15
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your network contains an Active Directory forest named contoso.com. The forest has three sites located in
London, Paris, and Berlin.
The London site contains a web server named Web1 that runs Windows Server 2021.
You need to configure Web1 as an HTTP content server for the hosted cache servers located in the Paris and Berlin sites.
Solution: You install the Static Content role service, and then you restart the IIS Admin Service. Does this meet the goal?

• A. Yes
• B. No

Answer: B

NEW QUESTION 16
You have a Microsoft Azure subscription and an on-premises network.
To the on-premises network, you deploy a new server named Server1 that runs Windows Server 2021. In Azure, you configure a virtual gateway on an Azure virtual network.
You need to ensure that the computers on the on-premises network can access virtual machines on the Azure virtual network.
What should you do on Server1?

• A. Install the Remote Access server rol
• B. From the Routing and Remote Access Server Setup Wizard, select Secure connection between two private networks.
• C. Install the Data Center Bridging (DCB) feature, and then run the Install-RemoteAccess cmdlet.
• D. Install the Remote Access server rol
• E. From the Routing and Remote Access Server Setup Wizard, select Virtual private network (VPN) access and NAT.
• F. Install the Data Center Bridging (DCB) feature, and then run the E nable-RemoteAccessRoutingDomain cmdlet.

Answer: A

NEW QUESTION 17
You have a network address translation (NAT) server named NAT1 that has an external IP address of 131.107.50.1 and an internal IP address of 10.0.0.1.
You deploy a new server named Web1 that has an IP address of 10.0.0.211.
A remote server named app.fabrikam.com has an IP address of 131.107.1.232. You need to make Web1 accessible to app.fabrikam.com through NAT1.
What command should you run from NAT1? To answer, select the appropriate options in the answer area.

Answer:

Explanation: https://technet.microsoft.com/en-us/itpro/powershell/windows/nat/add-netnatstaticmapping

NEW QUESTION 18
You have a network policy server (NPS) server named NPS1. One network policy is enabled on NPS1. The policy is configured as shown in the following exhibit.

Use the drop-down menus to select the answer choice that completes each statement based on the information in the graphic.

Answer:

Explanation: