NEW QUESTION 1
You have a server named Server1 that has a Server Core installation of Windows Server 2021. Server1 is configured to obtain an IP address automatically.
You need to configure the IPv4 address, netmask, and default gateway manually for a network interface named Ethernet on Server1.
What should you run?

• A. ipconfig.exe
• B. New-NetiPAddress
• C. Set-NetAdapter
• D. Set-NetIPv4Protocol

Answer: B

Explanation: References:
https://docs.microsoft.com/en-us/powershell/module/nettcpip/new-netipaddress?view=win10-ps

NEW QUESTION 2
Your network contains an Active Directory forest named contoso.com. The forest contains the VPN servers configured as shown in the following table.

You are configuring a Network Policy Server (NPS) server named Server1. Server1 has the following RADIUS clients.

All three VPN servers are configured to use Server1 for RADIUS authentication. All of the users in comtoso.com are allowed to establish a VPN connection. For each of the following statements, select YES if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.

Answer:

Explanation: References:
https://docs.microsoft.com/en-us/windows-server/remote/remote-access/vpn/always-on-vpn/deploy/vpn-deploy-

NEW QUESTION 3
You have the servers configured as shown in the following table.

Your network uses an internal address space of 10.10.0.0/24. Client computers are allocated addresses from 10.10.0.60 to 10.10.0.199.
Server4 has the IPv4 configuration shown in the following table.

You need to configure Server4 to provide Internet access to the computers on the network.
Which three actions should you perform in sequence? To answer move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

Answer:

Explanation:

NEW QUESTION 4
You have a Hyper-V host named Server1 that runs Windows Server 2021. Server1 has a virtual switch named Switch1.
Server1 hosts the virtual machines configured as shown in the following table.

Windows Firewall on VM1 and VM2 is configured to allow ICMP traffic. VM1 and VM2 connect to Switch1. You fail to ping VM1 from VM2.
You need to view the VirtualSubnetId to which VM1 connects.
Which cmdlet should you run on Server1? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:

NEW QUESTION 5
Your network contains an Active Directory forest named contoso.com. The functional level of the forest is Windows Server 2012.
The forest contains five domain controllers and five VPN servers that run Windows Server 2021. Five hundred users connect to the VPN servers daily.
You need to configure a new server named Server1 as a RADIUS server. What should you do first?

• A. On Server1, deploy the Remote Access server role.
• B. On Server1, deploy the Network Policy and Access Services role.
• C. On a domain controller, set the forest functional level to Windows Server 2021.
• D. On each VPN server, run the New-NpsRadiusClient cmdlet.

Answer: B

Explanation: http://www.nyazit.com/configure-network-policy-server-2021/

NEW QUESTION 6
Refer to Exhibit:

You plan to implement a VPN. FabRA1 will use the RADIUS proxy for authentication.
You need to ensure that VPN clients can be authenticated and can access internal resources. The solution must ensure that FabRS1 is used as a RADIUS server and FabRPl is used as a RADIUS proxy.
Which two actions should you perform? Each correct answer presents part of the solution.

• A. Create a connection request policy on FabRSl.
• B. Create a connection request policy on FabRPl.
• C. Create a network policy on FabRSl.
• D. Delete the default connection request policy on FabRSl.
• E. Create a network policv on FabRPl.

Answer: BC

NEW QUESTION 7
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your network contains an Active Directory domain named adatum.com. The domain contains two DHCP servers named Server1 and Server2.
Server1 has the following IP configuration.

Server2 has the following IP configuration.

Some users report that sometimes they cannot access the network because of conflicting IP addresses. You need to configure DHCP to avoid leasing addresses that are in use already.
Solution: On Server1, you modify the ActivatePolicies setting of the scope. Does this meet the goal?

• A. Yes
• B. No

Answer: B

NEW QUESTION 8
You have a Nano Server that has one network interface. The server is configured to obtain an IP address automatically.
You need to configure the server to have the following IP configurations:
• IP address 172.16.3.100
• Default gateway: 172.163.1
• Subnet mask: 255.255.255.0
What command should you run? To answer, select the appropriate options in the answer area.

Answer:

Explanation: References: https://docs.microsoft.com/en-us/powershell/module/nettcpip/new-netipaddress?view=win10-ps

NEW QUESTION 9
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals.
Refer to exhibit:

Server1 has two virtual machines named VM1 and VM that run Windows Server 2021. VM1 connects to Private VM2 has two network adapters.
You need to ensure that VM1 connects to the corporate network by using NAT.
Solution: You connect VM2 to private1 and External1. You install the Remote Access Serverrole on VM2, and you configure NAT in the Routing and Remote Access console. You configure VM1 to use VM2 as the default gateway.
Does this meet the goal?

• A. Yes
• B. No

Answer: A

NEW QUESTION 10
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some questions sets might have more than one correct solutions, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a server named Server1 that runs Windows Server 2021. Server1 is configured as a VPN server. Server1 is configured to allow domain users to establish VPN connections from 06:00 to 18:00 everyday of the week.
You need to ensure that domain users can establish VPN connections only between Monday and Friday.
Solution: From Server Manager, You modify the Access Policies on Server1.
Does this meet the goal?

• A. Yes
• B. No

Answer: A

NEW QUESTION 11
You have an Active Directory domain named Contoso.com. The domain contains Hyper-V hosts named Server1 and Server2 that run Windows Server 2021. The Hyper-V hosts are configured to use NVGRE for network virtualization.
You have six virtual machines that are connected to an external switch. The virtual machines are configured as shown.

To which virtual machine or virtual machines can VM1 and VM3 connect? To answer, select the appropriate options in the answer area.

Answer:

Explanation: The GRE keys must match.
To separate the traffic between the two virtualized networks, the GRE headers on the tunneled packets include a GRE Key that provides a unique Virtual Subnet ID for each virtualized network.
References:
https://blogs.technet.microsoft.com/keithmayer/2012/10/08/step-by-step-hyper-v-network-virtualization-31-days

NEW QUESTION 12
You have a virtual machine named VM1 that runs Windows Server 2021. VM1 is a Remote Desktop Services (RDS) server.
You need to ensure that only TCP port 3389 can be used to connect to VM1 over the network.
Which command should you run on the Hyper-V host? To answer, select the appropriate options in the answer area.

Answer:

Explanation: References:
https://technet.microsoft.com/en-us/library/dn464289.aspx

NEW QUESTION 13
You have a server named Server1 that runs Windows Server 2021. Server1 has the following IP configuration.

You need to configure the default gateway on Server1 to allow for connectivity to other subnets via IPv6. Which command should you run? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

Answer:

Explanation: References: https://docs.microsoft.com/en-us/powershell/module/nettcpip/new-netroute?view=win10-ps

NEW QUESTION 14
You have multiple servers that run Windows Server 2021. You have a server named Server1 that is configured as a domain controller and a DNS server.
You need to create an Active Directory-integrated zone on Server1. What should you run?

• A. dism.exe
• B. dns.exe
• C. dnscmd.exe
• D. netsh.exe
• E. Set-DhcpServerDatabase
• F. Set-DhcpServerv4DnsSetting
• G. Set-DhcpServerv6DnsSetting
• H. Set-DNSServerSetting

Answer: C

NEW QUESTION 15
Your network contains an Active Directory forest named contoso.com. The forest contains a Network Policy Server (NPS) server named Radius1 that runs Windows Server 2021.
You need to create a new connection request policy that will allow only Secure Socket Tunneling Protocol (SSTP) connections. Radius1 will manage all authentication requests.
Which NAS port type and which authentication method should you configure in the connection request policy? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:

NEW QUESTION 16
You have a Hyper-V host named Server1 that runs Windows Server 2021. Server1 connects to your corporate network. The Corporate network uses the 10.10.0.0/16 address space.
Server1 hosts a virtual machine named VM1, VM1 is configured to have an IP addresses of 172.16.1.54/16. You need to ensure that VM1 can access the resources on the corporate network.
What should you do? To answer, select the appropriate options in the answer area.

Answer:

Explanation:

NEW QUESTION 17
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals.
Refer to exhibit:

Server1 has two virtual machines named VM1 and VM that run Windows Server 2021. VM1 connects to Private1. VM2 has two network adapters.
You need to ensure that VM1 connects to the corporate network by using NAT.
Solution: You connect VM2 to Private1 and External1. You install the Remote Access server on VM2, and you configure NAT in the Routing and Remote Access console. You configure VM1 and VM2 as the default gateway.
Does this meet the goal?

• A. Yes
• B. No

Answer: B

NEW QUESTION 18
You have a server named Server1 that runs Windows Server 2021. Server1 is a Hyper-V host. You run the commands shown in the following graphic:

Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.

Answer:

Explanation: