NEW QUESTION 1
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, yon will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have two servers that run Windows Server 2021.
You plan to create a Network Load Balancing (NLB) cluster that will contain both servers. You need to configure the network cards on the servers for the planned NLB configuration.
Solution: You configure the network cards to be on the same subnet and to have static IP addresses. You configure the cluster to use unicast.
Does this meet the goal?

• A. Yes
• B. No

Answer: A

Explanation:

References:
https://technet.microsoft.com/en-us/windows-server-docs/networking/technologies/network-load- balancing

NEW QUESTION 2
DRAG DROP
You have a file server named Server1 that runs Windows Server 2021.
You need to create a report that lists all of the share permissions assigned to the security principals on Server1.
How should you complete the command? To answer, drag the appropriate cmdlets to the correct targets. Each cmdlet may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 3
HOTSPOT
Your network contains an Active Directory forest named contoso.com. The forest contains an Active Directory Federation Services (AD FS) farm.
You install Windows Server 2021 on a server named Server2
You need to configure Server2 as a node in the federation server farm
Which cmdlets should you run? To answer, select the appropriate options in the answer area

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 4
You have a Hyper-V failover cluster that contains three nodes. Virtual machines are distributed evenly across the cluster nodes.
You need to ensure that if a node loses connectivity from the other nodes, the virtual machines on the node will be transitioned to one of the remaining nodes after one minute.
Which settings should you modify?

• A. QuarantineDuration and QuarantineThreshold
• B. SameSubnetDelay and CrossSubnetDelay
• C. QuorumArbitrationTimeMax and RequestReplyTimeout
• D. ResiliencyPeriod and ResiliencyLevel

Answer: D

Explanation:
References: https://blogs.msdn.microsoft.com/clustering/2015/06/03/virtual-machine-compute- resiliency-in-windows-server-2021/

NEW QUESTION 5
You have a server named Server1 that runs Windows Server 2021. You need to install the DNS Server role on Server1. What should you run?

• A. the dns.exe command
• B. the optionalfcaturcs.exe command
• C. the Install-Package cmdlet
• D. the Enable-WindowsOptionalFeature cmdlet

Answer: D

NEW QUESTION 6
HOTSPOT
You have a server named Server1 that runs Windows Server 2021 Server1 has the Windows Application proxy role service installed
You plan to deploy Remote Desktop Gateway (RD Gateway) services. Clients will connect to the RD Gateway services by using various types of devices including Windows, iOS and Android devices.
You need to publish the RD Gateway services through the Web Application Proxy.
Which command should you run? To answer, select the appropriate options in the answer area.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 7
HOTSPOT
You have a Windows Server 2021 failover cluster that has a cluster network named ClusterNetwork1. You need to ensure that ClusterNetwork1 is enabled for cluster communication only.
What command should you run? To answer, select the appropriate options in the answer area.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 8
HOTSPOT
Your network contains an Active Directory domain named contoso com The domain contains tour servers named Server 1. Server2. Server3. and Server4 that run Windows Server 2021
Server 1 and Server2 are nodes in Hyper-V cluster named Cluster1 You have a highly available virtual machine named VM1
Server1 is the owner node of VM1 Server3and Server4 are nodes of a scale-out file server named Cluster2,
The storage on Server1 is configured as shown in the following table

You need to move the virtual disk of VM1 to a different location
What should you do? To answer, select the appropriate options in the answer area

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 9
You have a server named Server1.
You enable BitLocker Drive Encryption (BitLocker) on Server1.
You need to change the password for the Trusted Platform Module (TPM) chip. What should you run on Server1?

• A. Initialize-Tpm
• B. Import-TpmOwnerAuth
• C. repair-bde.exe
• D. bdehdcfg-exe

Answer: B

NEW QUESTION 10
Note: This question is part of a series of questions that use the same similar answer choices. An
answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.
You have an Active Directory domain that contains two Hyper-V servers named Server1 and Server2. Server1 has Windows Server 2021 installed. Server2 has Windows Server 2012 R2 installed.
Each Hyper-V server has three network cards. Each network card is connected to a different subnet. Server1 contains a dedicated migration network.
Server2 contains a virtual machine named VM5.
You plan to perform a live migration of VM5 to Server1.
You need to ensure that Server1 uses all available networks to perform the live migration of VM5. What should you run1?

• A. the Mount-VHD cmdlet
• B. the Diskpart command
• C. the Set-VHD cmdlet
• D. the Set-VM cmdlet
• E. the Set-VMHost cmdlet
• F. the Set-VMProcessor cmdlet
• G. the Install-WindowsFeature cmdlet
• H. the Optimize-VHD cmdlet

Answer: E

NEW QUESTION 11
You have a Nano Server named Nano1.
Which cmdlet should you use to identify whether the DNS Server role is installed on Nano1?

• A. Find-NanoServerPackage
• B. Get-Package
• C. Find-Package
• D. Get-WindowsOptionalFeature

Answer: B

NEW QUESTION 12
HOTSPOT
Your network contains an Active Directory forest The forest contains two sites named Site1 and Site2. Site1 contains 10 domain controllers Site1 and Site2 connect to each other by using a WAN link
You run the Active Directory Domain Services Configuration Wizard as shown in the following graphic.


Server3 is the only server in Site2
Use the drop-down menus to select the answer choice that completes each statement based on the information graphic.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 13
HOTSPOT
Your network contains an Active Directory domain named contoso.com. The domain contains a domain controller named Server1 and a member server named Server2.
Server1 has the DNS Server role installed Server2 has IP Address Management IPAM installed The IPAM server retrieves zones from Server1 as shown in the following table

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 14
You have a server named Server1 that runs Windows Server 2021. The Docker daemon runs on Server1.
You need to ensure that members of a security group named Docker Administrators can administer Docker.
What should you do?

• A. Run the sc privsc ommand.
• B. Edit the Daemon.json file.
• C. Add Docker Administrators to the local Administrators group.
• D. Edit the Configuration.json file.

Answer: C

NEW QUESTION 15
After you answer a question in this section, you will NOT be able to return to it. As a result, these
questions will not appear in the review screen.
You have a server named Server1 that runs Windows Server 2021.
You plan to use Windows Server Backup to back up all of the data on Server1. You create a new volume on Server1.
You need to ensure that the new volume can be used as a backup target. The backup target must support incremental backups.
Solution: You mount the volume to C:Backup, and you format the volume by using exFAT. Does this meet the goal?

• A. Yes
• B. No

Answer: B

NEW QUESTION 16
For Windows Server 2021, Nano Server is distributed on the physical media, where you will find a
NanoServer folder; this contains a .wim image and a subfolder called Packages. It is these package files that you use to add server roles and features to the VHD image, which you then boot to.
Assume that several variables have been configured already, which PowerShell command would you use to create a Nano Server which had the Hyper-V role, clustering, OEM Drivers and antimalware?

• A. New-NanoServerImage -MediaPath $mediapath -BasePath $basepath -TargetPath $targetpath - ComputerName $computername -OEMDrivers -Clustering -Defender -Compute
• B. New-NanoServerImage -MediaPath $mediapath -BasePath $basepath -TargetPath $targetpath - ComputerName $computername -OEMDrivers -Clustering -Storage -EnableRemoteManagementPort
• C. New-NanoServerImage -MediaPath $mediapath -BasePath $basepath -TargetPath $targetpath - ComputerName $computername -OEMDrivers -Defender -Containers - EnableRemoteManagementPort
• D. New-NanoServerImage -MediaPath $mediapath -BasePath $basepath -TargetPath $targetpath - ComputerName $computername -Defender -Storage -Compute - EnableRemoteManagementPort

Answer: A

NEW QUESTION 17
You need to implement network virtualization.
On which object should you configure the virtual subnet ID?

• A. Virtual switch
• B. Hyper-V server
• C. VM
• D. Virtual network adapter

Answer: A

NEW QUESTION 18
In this section, you'll see one or more sets of questions with the same scenario and problem Each question presents a unique solution to the problem, and you must determine whether the solution meets the stated goals Any of the solutions might solve the problem. It is also possible that none of the solutions solve the problem.
Once you answer a question in this section, you will NOT be able to return to it As a result. these questions will not appear in the review screen
Note This question is part of a series of questions that present the same scenario Each question in the series contains a unique solution Determine whether the solution meets the stated goals.
Your network contains an Active Directory forest named contoso.com. The forest contains a member server named Server1 that runs Windows Server 2021 All domain controllers run Windows Server 2012 R2
Contoso com has the following configuration

You plan to deploy an Active Directory Federation Services (AD FS) farm on Served and to configure device registration You need to configure Active Directory to support the planned deployment. Solution You upgrade a domain controller to Windows Server 2021 Does this meet the goal?

• A. Yes
• B. No

Answer: B

NEW QUESTION 19
DRAG DROP
You have a server named Server1 that runs Windows Server 2021. Server1 has the Hyper-V server role installed and hosts a virtual machine named VM1.
Server1 has an NVMe storage device. Currently, the device is assigned to VM1 through a Discrete Device Assignment.
You need to make the storage device available to Server1.
Which four actions should you perform in sequence? To answer, move the appropriate actions from
the list of actions to the answer area and arrange them in the correct order.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:
If you want to return the device back to its original state, you will need to stop the VM and issue the
following cmdlets:
Remove-VMAssignableDevice Mount-VMHostAssignableDevice
You can then re-enable the device in device manager.
References: https://docs.microsoft.com/en-us/windows-server/virtualization/hyper-v/deploy/deploying-storage-devices-using-dda#removing-a-device-and-returning-it-to-the-host

NEW QUESTION 20
You have a server named Server1 that runs Windows Server 2021. Windows Defender is enabled on Server1.
Server1 runs an application named App1 that stores various types of files in Microsoft OneDrive for Business, MicrosoftOneDrive, and Microsoft SharePoint Online. App1 also interacts with several local services.
You need to prevent Windows Defender from scanning any files opened by App1. What should you do on Server1?

• A. Run the Set-ExecutionPolicy cmdlet.
• B. Run the New-AppLockerPolicy cmdlet.
• C. Modify the real-time protection settings in Windows Defender.
• D. Run the Add-MpPreference cmdlet.

Answer: D

Explanation:

References:
https://docs.microsoft.com/en-us/windows/security/threat-protection/windows-defender-antivirus/configure-proc

NEW QUESTION 21
You have a server named Server1 that runs Windows Server 2021 You need to configure Server1 as a multitenant RAS Gateway. What should you install on Server1?

• A. the Network Policy and Access Services server role
• B. the Remote Access server rote
• C. the Data Center Bridging feature
• D. the Network Controller server role

Answer: B

NEW QUESTION 22
HOTSPOT
You have a Hyper-V host named Server1 that runs Windows Server 2021. Server1 has a virtual disk file named Disk1.vhdx that contains an installation of Windows Server 2021.
You create a virtual disk file named Disk2.vhdx that is configured as shown in the following exhibit.

Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 23
You have two servers named Server1 and Server2 that run Windows Server 2021. Server1 contains a volume named Volume1.
You implement a Storage Replica that replicates the contents of Volume1 from Server1 to Server2. Server1 fails.
From Server2, you need to ensure that you can access the contents of Volume1. What should you run?

• A. Update-StoragePool
• B. Set-SRPartnership
• C. vssadmin revert shadow
• D. Clear-FileStorageTier

Answer: B

Explanation:
References:
https://docs.microsoft.com/en-us/windows-server/storage/storage-replica/server-to-server-storage-replication

NEW QUESTION 24
HOTSPOT
You have four Hyper-V hosts named Server1, Server2, Server3 and Server4 that run Windows Server 2021. The hosts are nodes in a failover cluster.
The failover cluster is configured to balance virtual machines when a node is more than 80 percent loaded.
You need to configure the failover cluster to balance the virtual machines when the load of a node is more than five percent higher than the average for the nodes.
Which command should you run? To answer, select the appropriate options in the answer area.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 25
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might
have more than one correct solution, white others might not have a correct solution. Your network contains an Active Directory forest
You install Windows Server 2021 on 10 virtual machines.
You need to deploy the Web Server (IIS) server role identically to the virtual machines.
Solution: From Windows System Image Manager, you create an answer file, you copy the file to C:Sysprep on each virtual machine, and then you run the Apply-Image cmdlet.
Does this meet the goal?

• A. Yes
• B. No

Answer: B

NEW QUESTION 26
Note This question is part of a series of questions that present the same scenario. Each question in
the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You are a server administrator at a company named Contoso, Ltd.
Contoso has a Windows Server 2021 Hyper-V environment configured as shown in the following table.

All of the virtual switches are of the external type.
You need to ensure that you can move virtual machines between the hosts without causing the virtual machines to disconnect from the network.
Solution: You implement live migration by using Host1 and Host2. Does this meet the goat?

• A. Yes
• B. No

Answer: B

NEW QUESTION 27
HOTSPOT
You have a DNS server named Server1.
The forwarders are configured as shown in the Forwarders exhibit. (Click the Exhibit button.)

The Advanced Settings are configured as shown in the Advanced exhibit. (Click the Exhibit button.)

The Root Hints are configured as shown in the Root Hints exhibit. (Click the Exhibit button.)

Server1 does not contain any DNS zones.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

Recursion is disabled so internet hosts cannot be resolved. The recursive test fails because recursion is disabled.
Server1 is not configured as a root server. The forwarders list would be greyed out if it was.

NEW QUESTION 28
......