NEW QUESTION 1
Which option lists the goals of LISP?

• A. Redirection, scalability, optimized routing, client independence, address family agnostic
• B. Redirection, scalability, OTV replacement, client independence, address family agnostic
• C. Redirection, scalability, optimized routing, client independence, address family agnostic, BGP replacement
• D. Redirection, scalability, optimized routing, client independence, address family agnostic, Layer 4 routing

Answer: A

Explanation: https://www.cisco.com/c/dam/en/us/products/collateral/ios-nx-os-software/locator-id-separation-protocol-lisp/lisp-vm_mobility_wp.pdf

NEW QUESTION 2
Which three virtual services are supported by Cisco Nexus 1000v Series Switch using the vPath? (Choose three)

• A. Cisco Virtual Security Gateway
• B. Cisco UCS telemetry features
• C. Cisco IMC serial over LAN
• D. virtual APIC appliance
• E. Cisco ASA for 1000v
• F. Cisco Wide Area Network Application Services

Answer: AEF

Explanation: https://www.cisco.com/en/US/docs/switches/datacenter/vsg/sw/4_2_1_VSG_1_4_1/vpath_vservices/reference/guide/vpath_vservices_overview.html

NEW QUESTION 3
Which two statements about policing, queuing,and scheduling ate true? (Choose two)

• A. You can schedule traffic by imposing a maximum data rate on a class of traffic so that excess packets are dropped from the queue
• B. You can apply WRED to a class of traffic, which allows packets to be dropped based on the CoS field.
• C. The WRED algorithm is a reactive approach that only applies to traffic confestion
• D. Policing is the monitoring of data rates for a particular class of traffic, The device can also monitor associated burst sizes
• E. Only single rate and dual rate policers can be defined.

Answer: BD

NEW QUESTION 4
Which two options are best practices when registering Cisco UCS Manager to UCS Central? (Choose
two.)

• A. Use an IP address for UCS Domain when registering.
• B. Ensure that NTP is configured on the UCS Domain and UCS Central.
• C. Ensure that the UCS Domain and UCS Central are in the same Layer 2 domain.
• D. Use a fully qualified domain name for UCS Domain.
• E. Ensure that the independent local time source is used for UCS Domain and UCS Central.

Answer: BD

NEW QUESTION 5
DRAG DROP
Drag and drop the enlisted four offers from the left onto the correct Cisco ONE Enterprise Cloud Suite on the right.

Answer:

Explanation:

NEW QUESTION 6
Which option is the default FC-MAP?

• A. 0f:fc:00
• B. 0e:fc:00
• C. 0e:fe:00
• D. 0f:fe:00

Answer: B

NEW QUESTION 7
Within Platform as a Service, which two components are managed by the customer? (Choose two.)

• A. data
• B. applications
• C. networking
• D. middleware
• E. operating system

Answer: AB

NEW QUESTION 8
An IoT Solution is more likely to generate a lot of analytics and data. Which of the following enables this information to be analysed and managed through integration with 3rd party devices and applications?

• A. ASR
• B. API
• C. Prime Infrastructure
• D. IP67

Answer: B

NEW QUESTION 9
Which two statements about multicast routing are true? (Choose two.)

• A. IPv6 static multicast routes are supported
• B. You can define RPF routes for multicast on border routers to enable reverse path forwarding to an external network
• C. RPF routes for multicast can be redistributed
• D. Multicast routes are used to directly forward traffic without making RPF checks
• E. You can define RPF routes for multicast when you want multicast data to diverge from theunicast traffic path

Answer: BE

NEW QUESTION 10
Which description of a virtual private cloud is true?

• A. an on-demand configurable pool of shared data resources allocated within a private cloud environment, which provides assigned DMZ zones
• B. an on-demand configurable pool of shared networking resources allocated within a private cloud environment, which provides tenant isolation
• C. an on-demand configurable pool of shared software applications allocated within a public cloud environment, which provides tenant isolation
• D. an on-demand configurable pool of shared computing resources allocated within a public cloud environment, which provides tenant isolation

Answer: D

Explanation:
https://en.wikipedia.org/wiki/Virtual_private_cloud

NEW QUESTION 11
While you attempt to register Cisco UCS Manager domains with Cisco UCS Central, you find that it is failing. Which three options are possible causes for the failure between the Cisco UCS Manager domainand Cisco UCS Central? (Choose three.)

• A. incorrect default policy configured in Cisco UCS Central
• B. incorrect shared secret
• C. data and time mismatch
• D. using the IP address of the Cisco UCS Manager domain instead of the FQDN
• E. version mismatch
• F. TCP packet loss

Answer: BCF

NEW QUESTION 12
Refer to the exhibit.

Which two types of encapsulations can used in each switching mode. When utilizing the Cisco
Application Virtual Switch in ACL fabric? (Chooes two)

• A. No local switching : VXLAN
• B. No local switching :vlan or vxlan
• C. Local switching : VXLAN
• D. Local switching : VLAN
• E. Local switching: VLAN OR VXLAN

Answer: AE

NEW QUESTION 13
Refer to the exhibit.

You have been investigating an issue with your Cisco UCS blade booting from remote Fibre Channel storage. Upon inspection, you see the output in the exhibit. Which two statements are true? (Choose two)

• A. FC_ID 0x5e01ef is that of the storage array
• B. FC_ID 0x5e003c is that of the HBA
• C. FC_ID 0x5e003c is that of the MDS or Cisco Nexus 5000 Series Switch
• D. FC_ID 0x5e003c is that of the storage array
• E. FC_ID 0x5e01ef is that of the MDS or Cisco Nexus 5000 Series Switch

Answer: AB

Explanation: https://nicholasgerasimatos.wordpress.com/2014/01/10/cisco-ucs-boot-from-santroubleshooting/

NEW QUESTION 14
Refer to the exhibit.

Using GET method with this XML code, which two pieces of information about Application Policy Infrastructure Controllers shows the output? ( Choose two)

• A. ports of the leaves where the APICs are connected
• B. hard disks status for each APIC in the cluster
• C. APIC version installed on each node
• D. serial number of each APIC in the cluster
• E. admin status of each APIC in the cluster
• F. number of network interfaces of each APIC

Answer: DE

NEW QUESTION 15
An administrator is replacing a fabric interconnect.The failed interconnect was FI-A and was master at
the time of failure.Which process brings the replacement fabric interconnect into the cluster?

• A. Connect the new FI-A to FI-B USING THE Layer 1/Layer 2 cables onl
• B. Sync the configuration when prompted.Connect the management interface when the configuration is synced.
• C. Connect the new FI-A to the management network and the Layer 1/Layer 2 links to the existingFIB.Use the full state backup file to restore the configuration when prompted at the console.
• D. Connect the new FI-A to the management network onl
• E. Use the fuil state backup file to restore configuration through Cisco UCS Manager GUI.Connect the Layer 1/Layer 2 cables
• F. Connect the FI-A to the management network and the Layer 1/Layer 2 links to the existing FI
• G. Use the all configuration backup file to restore the configuration through Cisco UCS Manager GUI
• H. Connect the new FI-A to the management network and the Layer 1/Layer 2 links to the existing FI- B Let the system sync with FI-B when prompted at the console

Answer: C

NEW QUESTION 16
Which three distinct categories are within the cloud computing stack? (Choose three)

• A. SaaS
• B. laaS
• C. NaaS
• D. PaaS
• E. LaaS
• F. DaaS

Answer: ABD

NEW QUESTION 17
After you deploy a Layer 4 - Layer 7 service graph in Cisco AC, where do you modify the parameters
of the Layer 4 - Layer 7 device(s)?

• A. under the Consumer EPG > L4-L7 Service Parameters
• B. under the Service Graph Template
• C. under the Provider EPG > L4-L7 Service Parameters
• D. under the Deployed Graph Instance

Answer: D

NEW QUESTION 18
Refer to the exhibit.

Health scores can be aggregated for a variety of areas such as for the system, infrastructure, tenants, applications, or services. Which health score level is the exhibit from APIC GUI an example of?

• A. system
• B. managed object
• C. pod
• D. tenant

Answer: C

Explanation:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/1-x/aci-fundamentals/b_ACI-Fundamentals/b_ACI_Fundamentals_BigBook_chapter_01010.html

NEW QUESTION 19
How do you manually configure a vNIC MAC address?

• A. Modify the adapter policy
• B. Use the set identity dynamic-mac command
• C. Modify the dynamic vNIC connection policy
• D. Use the mac-address-table static command

Answer: B