300-101 Exam Questions - Online Test

300-101 Premium VCE File

Learn More 100% Pass Guarantee - Dumps Verified - Instant Download
150 Lectures, 20 Hours

Certified of 300 101 route dumps materials and training tools for Cisco certification for client, Real Success Guaranteed with Updated 9tut ccnp 300 101 pdf dumps vce Materials. 100% PASS ROUTE Implementing Cisco IP Routing exam Today!

P.S. Certified 300-101 training tools are available on Google Drive, GET MORE: https://drive.google.com/open?id=1g4kPItyKIZuA3JfCSZX112aKL18D2zfl

New Cisco 300-101 Exam Dumps Collection (Question 12 - Question 21)

Question No: 12

Which three characteristics are shared by subinterfaces and associated EVNs? (Choose three.)

A. IP address

B. routing table

C. forwarding table

D. access control lists

E. NetFlow configuration

Answer: A,B,C

Topic 5, Infrastructure Security

53.For troubleshooting purposes, which method can you use in combination with the u201cdebug ip packetu201d command to limit the amount of output data?

A. You can disable the IP route cache globally.

B. You can use the KRON scheduler.

C. You can use an extended access list.

D. You can use an IOS parser.

E. You can use the RITE traffic exporter.

Question No: 13

PPPoE is composed of which two phases?

A. Active Authentication Phase and PPP Session Phase

B. Passive Discovery Phase and PPP Session Phase

C. Active Authorization Phase and PPP Session Phase

D. Active Discovery Phase and PPP Session Phase

Answer: D

Question No: 14

For security purposes, an IPv6 traffic filter was configured under various interfaces on the local router. However, shortly after implementing the traffic filter, OSPFv3 neighbor adjacencies were lost. What caused this issue?

A. The traffic filter is blocking all ICMPv6 traffic.

B. The global anycast address must be added to the traffic filter to allow OSPFv3 to work properly.

C. The link-local addresses that were used by OSPFv3 were explicitly denied, which caused the neighbor relationships to fail.

D. IPv6 traffic filtering can be implemented only on SVIs.

Answer: C

Question No: 15

A network administrator recently redistributed RIP routes into an OSPF domain. However, the administrator wants to configure the network so that instead of 32 external type-5 LSAs flooding into the OSPF network, there is only one.

What must the administrator do to accomplish this?

A. Configure summarization on R1 with area 1 range 172.16.32.0 255.255.224.0

B. Configure summarization on R1 with summary-address 172.16.32.0 255.255.224.0

C. Configure area 1 as a stub area with area 1 stub

D. Configure area 1 as a NSSA area with area 1 stub nssa

Answer: B

Explanation:

In many cases, the router doesn't even need specific routes to each and every subnet (for example, 172.16.1.0/24). It would be just as happy if it knew how to get to the major network (for example, 172.16.0.0/16) and let another router take it from there. In our telephone network example, the local telephone switch should only need to know to route a phone call to the switch for the called area code. Similarly, a router's ability to take a group of subnetworks and summarize them as one network (in other words, one advertisement) is called route summarization. Besides reducing the number of routing entries that a router must keep track of, route summarization can also help protect an external router from making multiple changes to its routing table due to instability within a particular subnet. For example, let's say that we were working on a router that connected to 172.16.2.0/24. As we were working on the router, we rebooted it several times. If we were not summarizing our routes, an external router would see each time 172.16.2.0/24 went away and came back. Each time, it would have to modify its own routing table. However, if our external router were receiving only a summary route (i.e., 172.16.0.0/16), then it wouldn't have to be concerned with our work on one particular subnet. This is especially a problem for EIGRP,

which can create stuck in active (SIA) routes that can lead to a network melt-down. Summarization Example We have the following networks that we want to advertise as a single summary route: * 172.16.100.0/24 * 172.16.101.0/24 * 172.16.102.0/24 * 172.16.103.0/24 * 172.16.104.0/24 * 172.16.105.0/24 * 172.16.106.0/24

Question No: 16

Which keyword of the aaa authentication ppp command supports PAP only?

A. line

B. krb5

C. local

D. local-case

E. enable

Answer: B

Question No: 17

Which encapsulation supports an interface that is configured for an EVN trunk?

A. 802.1Q

B. ISL

C. PPP

D. Frame Relay

E. MPLS

F. HDLC

Answer: A

Question No: 18

What is the function of the snmp-server enable traps and snmp-server host 192.168.1.3 trap version 1c public commands?

A. to allow only 192.168.1.3 to access the system using the community-string public.

B. to collect information about the system on a network management server.

C. to disable all SNMP informs that are on the system

D. to allow private communications between the router and the host.

Answer: A

Question No: 19

Refer to the Exhibit.

A network engineer has configured NTP on a Cisco router, but the time on the router is still incorrect. What is the reason for this problem?

A. The router is not syncing with the peer, even though the NTP request and response packets are being exchanged.

B. The router is not syncing with peer, and the NTP request and response packets are not being exchanged.

C. The router is syncing with the peer, and the NTP request and response packets are being exchanged.

D. The router is dropping all NTP packets.

Answer: A

Question No: 20

Which technology does Easy Virtual Network use?

A. MP-BGP

B. DMVPN

C. MPLS

D. VRF-Lite

Answer: D

Question No: 21

A network engineer is asked to configure a "site-to-site" IPsec VPN tunnel. One of the last things that the engineer does is to configure an access list (access-list 1 permit any) along with the command ip nat inside source list 1 int s0/0 overload. Which functions do the two commands serve in this scenario?

A. The command access-list 1 defines interesting traffic that is allowed through the tunnel.

B. The command ip nat inside source list 1 int s0/0 overload disables "many-to-one"

access for all devices on a defined segment to share a single IP address upon exiting the external interface.

C. The command access-list 1 permit any defines only one machine that is allowed through the tunnel.

D. The command ip nat inside source list 1 int s0/0 overload provides "many-to-one" access for all devices on a defined segment to share a single IP address upon exiting the external interface.

Answer: D

Recommend!! Get the Certified 300-101 dumps in VCE and PDF From Examcollectionplus, Welcome to download: https://www.examcollectionplus.net/vce-300-101/ (New 487 Q&As Version)