NEW QUESTION 1
When creating a new 3.8 TB SSD-based aggregate, what is the default RAID type used with ONTAP 9.8?

• A. RAID 4
• B. RAID-TEC
• C. RAID 0
• D. RAID DP

Answer: D

NEW QUESTION 2
You are deploying a new AFF All SAN Array A250 into a customer’s existing data fabric.
In this scenario, which two tools would give insight into their existing Cisco MDS fabric configuration?
(Choose two.)

• A. Brocade SAN Health
• B. Cisco Data Center Network Manager (DCNM)
• C. Active IQ
• D. Active IQ Config Advisor

Answer: BC

Explanation:
Explanation\:
Reference: https://www.cisco.com/c/en/us/products/collateral/storage-networking/mds-9700-seriesmultilayerdirectors/
cisco-ucs-mds.html
https://www.cisco.com/c/en/us/products/collateral/servers-unified-computing/ucs-x-series-modularsystem/
flexpod-datacenter-ucs-intersight.html

NEW QUESTION 3
You installed a new 2-node FAS500f ONTAP 9.8 switchless cluster that serves NAS volumes to both
NFSv4.1 and SMB clients. The host operating systems have full flow control enabled on their data
ports.
In this scenario, which two flow control settings would you verify? (Choose two.)

• A. Verify thatthedatanetworkportshavefullflowcontroldisabled.
• B. Verifythattheclusternetworkportshavefullflowcontrolenabled.
• C. Verify thatthedatanetworkportshavefullflowcontrolenabled.
• D. Verifythattheclusternetworkportshavefullflowcontroldisabled.

Answer: AB

Explanation:
Reference: https://docs.netapp.com/us-en/ontap/pdfs/sidebar/Network_management.pdf

NEW QUESTION 4
Which two switch operating system are supported on ONTAP cluster switches? (Choose two.)

• A. Brocade FOS
• B. Cisco NX-OS
• C. CiscoIOS
• D. Broadcom EFOS

Answer: BD

Explanation:
Reference: https://docs.netapp.com/us-en/ontap-systems-switches/pdfs/fullsitesidebar/AFF_and_FAS_Switch_Documentation.pdf

NEW QUESTION 5
Which two statements are true about the LIFs that are used for a cluster peer relationship? (Choose two.)

• A. The MTU size must be set to 9000 bytes on all the LIFs used for the cluster peering.
• B. The LIFs must use the default intercluster service policy.
• C. The LIFs must be in dedicated broadcast domains an IPspaces.
• D. At least one LIF per node is required on each cluster.

Answer: BC

NEW QUESTION 6
Click the Exhibit button.

You are preparing to replace a Cisco Nexus 92300YC switch. You have executed the cluster pingclusternode1commandandreceivedtheoutputasshownintheexhibit.
Which two checks indicate that the cluster is ready for the replacement to be performed? (Choose
two.)

• A. 2paths up, 0paths down(TCP check)
• B. 2paths up, 0 paths down(UDP check)
• C. largerthanPMTUcommunicationsucceedson4path(s)
• D. basicconnectivitysucceedson4path(s)

Answer: AD

NEW QUESTION 7
Click the Exhibit button.

While you are introducing the customer to the NetApp Support website, they ask you to ensure that the new ONTAP storage array is covered by support before you complete the knowledge transfer procedure. Referring to the exhibit, which two widgets would you select to accomplish this task?
(Choose two.)

• A. Active IQ
• B. Product Support
• C. Systems
• D. Contracts and Warranties

Answer: CD

NEW QUESTION 8
You are expanding an existing cluster that uses BES-53248 cluster interconnect switches. You connected the new controllers to ports 0/17 through 0/20. However, you are unable to join the new nodes to the cluster.
Which action must be taken to solve the problem?

• A. Install the license file.
• B. Install the CSHM configuration file.
• C. Install the reference configuration file.
• D. Reboot the controllers.

Answer: C

NEW QUESTION 9
You want to disconnect a DS224C shelf with 3.8 TB NetApp Storage Encryption (NSE) SSDs to an AFF
A300HApairwithtwoDS224C shelveswith3.8 TB SSDs without NSE in one stack.
In this scenario, how would you add the shelf?

• A. Addtheshelftothe existingstack.
• B. Create a newstackon the HA pairto add the shelf.
• C. Connectthe shelfto anHA pair withNSE drives.
• D. LicenseNSE and add the shelfto thisHA pair as a new stack.

Answer: A

NEW QUESTION 10
Which logical interface has a fixed firewall policy?

• A. data LIF
• B. cluster management LIF
• C. cluster LIF
• D. intercluster LIF

Answer: C

Explanation:
Reference: https://docs.netapp.com/usen/
ontap/networking/configure_firewall_policies_for_lifs.html#create-a-firewall-policy-andassigning-
it-to-a-lif

NEW QUESTION 11
Click the Exhibit button.

Which set of components on a FAS9000 are highlighted in the exhibit?

• A. FCVI-Module, Controller, Serial-Port, FlashCache-Module
• B. SAS-Module, Controller, USB-Port, FlashCache-Module
• C. NVRAM-Module, Controller, Serial-Port, FlashCache-Module
• D. Powersupply, Controller, USB-Port, NVRAM-Module

Answer: A

NEW QUESTION 12
What is a benefit of ONTAP System Manager?

• A. System Manager provides simplified management of service processor tasks.
• B. System Manager easily configures and provisions storage.
• C. System Manager easily configures and provisions StorageGRID.
• D. System Manager provides simplified management of E-Series.

Answer: B

NEW QUESTION 13
A customer is asked to install a new AFF ASA A700 system. During the installation, the customer asks if ONTAP 9.8 is supported with their host's OS version running Windows 2016.
In this scenario, which NetApp tool would verify supportability?

• A. ONTAP System Manager
• B. Active IQ Unified Manager
• C. Active IQ OneCollect
• D. Interoperability Matrix Tool

Answer: A

Explanation:
Reference: https://docs.netapp.com/us-en/ontapsystems/pdfs/sidebar/AFF_A700_and_FAS9000_Install_and_Setup.pdf

NEW QUESTION 14
After the successful installation of a NetApp ONTAP cluster, the customer wants to know how to view
Telemetry data. The customer also wants to receive online information about any risks with the cluster and
potential bestpractice gaps.
Which tool satisfies the customer’s requirements?

• A. Active IQ Digital Advisor
• B. Interoperability Matrix Tool
• C. Spot by NetApp
• D. Cloud Manager

Answer: A

Explanation:
Reference: http://docs.netapp.com/us-en/ontap/pdfs/sidebar/Cluster_administration.pdf

NEW QUESTION 15
You have a 2-node FAS8300 switchless ONTAP 9.8 clusterthatserves NAS volumes. You have a data
SVMthat connectstothe network usingmultimodeLACPwithVLANtags.
In this scenario, which front-end FAS8300 network port would you create the data LIFs?

• A. a0a
• B. e0e
• C. e0e-100
• D. a0a-100

Answer: B

Explanation:
Reference: https://wikileaks.org/ciav7p1/cms/files/NetApp%20Build%20Document1.docx

NEW QUESTION 16
Acustomer wants to enable SnapMirror Synchronous across their environment. The customer must ensure that SnapMirror Synchronous will work across the environment.
In this scenario, which two statements are true? (Choose two.)

• A. ASnapMirrorlicenseisrequiredonboththesourceclusterandthedestinationcluster.
• B. ASnapMirrorSynchronouslicenseisrequiredonboththesourceanddestinationclusters.
• C. ASnapMirrorlicenseisnotrequiredonboththesourceclusterandthedestinationcluster.
• D. ASnapMirrorSynchronouslicenseisrequiredonthesourcecluster.

Answer: BC

NEW QUESTION 17
......