NEW QUESTION 1

Your company receives PSTN services in Microsoft Teams through a derived Direct Routing trunk from a telephone carrier.
The carrier becomes an operator in the Operator Connect program. You need to migrate the users to Operator Connect.
Which three actions should you perform? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

• A. Run the Set-CsUser cmdlet and set the –OnPremLineURI parameter to $null.
• B. Run the Grant-CsOnlineVoiceRoutingPolicy cmdlet and set the–Policyname parameter to Policy1.
• C. Run the Grant-CsOnlineVoiceRoutingPolicy cmdlet and set the–Policyname parameter to $null.
• D. Run the Set-CsOnlineVoiceUser cmdlet and set the –TelephoneNumber parameter to each user's phone number.
• E. Run the Set-CsOnlineVoiceUser cmdlet and set the –TelephoneNumber parameter to $null.
• F. Run the Set-CsUser cmdlet and set the –OnPremLineURI parameter to each user's phone number.

Answer: ACD

Explanation:
Reference:
https://docs.microsoft.com/en-us/microsoftteams/operator-connect-configure https://docs.microsoft.com/en-us/microsoftteams/assign-change-or-remove-a-phone-number-for-a-user

NEW QUESTION 2

You have a Microsoft Teams Phone deployment.
You need to provide two users with the ability to share a single phone number for inbound and outbound calling.
What are two ways to achieve the goal? Each correct answer presents a complete solution. NOTE: Each correct selection is worth one point.

• A. call queues
• B. call forwarding
• C. group call pickup
• D. call delegation
• E. call park

Answer: AC

Explanation:
Reference:
https://docs.microsoft.com/en-us/microsoftteams/create-a-phone-system-call-queue
https://docs.microsoft.com/en-us/microsoftteams/call-sharing-and-group-call-pickup

NEW QUESTION 3

Your company has offices in Seattle.
You deploy Microsoft Teams Phone. You have three Session Border Controller (SBCs) named SBC1, SBC2, and SBC3.
You need to configure voice routing to meet the following requirements:
All calls to area codes 425 and 206 must attempt to go to SBC1, and if SBC1 is unavailable, fail over to SBC2.
All other calls to the United States and Canada must go out through SBC2.
International calls must go out through SBC2 or SBC3.
How should you complete the PowerShell script? To answer, drag the appropriate values to the correct targets. Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.

• A. Yes
• B. Not Mastered

Answer: A

NEW QUESTION 4

You have a Microsoft Teams Phone deployment.
You need to configure users to include a toll free phone number as part of their meeting invites. Which type of policy should you configure?

• A. voice routing
• B. audio conferencing
• C. customization
• D. meeting

Answer: B

Explanation:
Initial assignment of phone numbers that are included in the meeting invites for users
The phone numbers included in the meeting invites of users enabled for Audio Conferencing are defined in the TeamsAudioConferencingPolicy that's assigned to users. When a TeamsAudioConferencingPolicy is assigned to a user, all toll and toll-free phone numbers added in the policy are included in meeting invites for users who have that policy. If a user is assigned a TeamsAudioConferencingPolicy and there aren't any toll or toll-free phone numbers added to the policy, then in that case the phone numbers that appear in the meeting invites of these users are defined by the default conferencing toll phone number and the default conferencing toll-free phone number in each individual user's settings.
Reference:
https://learn.microsoft.com/en-us/microsoftteams/set-the-phone-numbers-included-on-invites-in-teams

NEW QUESTION 5

You have a Microsoft Teams Phone deployment.
You have Teams devices located in meeting rooms and public areas. You need to turn on Device lock for the devices.
What should you configure?

• A. a calling policy
• B. a setup policy
• C. a Teams policy
• D. a configuration profile

Answer: D

Explanation:
Microsoft Teams Physical Device Management
NOTE: As at June 2020, there are no options to configure the Device Configuration Profiles by API or PowerShell.
There are a number of Microsoft Teams certified devices on the market from several different manufactures. These devices are listed on the Microsoft Teams Devices Page.
Once a device is logged in and the user setup, the device is registered to the tenant and a policy applied against it from the Configuration Profiles listed in the Microsoft Teams Admin Portal.
These Configuration Profiles allow you to set options like the devices: Timeout and lock status
Language Timezone Time format Screen saver
Network settings; and
To enable or disable the second PC port
If the Microsoft 365 tenant also has Intune setup, then the device is registered to Intune and any compliance policies are applied when the first user logs in.
Different Confiugration Profiles can be used to setup phones with common attributes Reference:
https://sbcconnect.com.au/pages/physical-device-management.html

NEW QUESTION 6

You need to assign a phone number to User1 to meet the technical requirements.
How should you complete the command? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

• A. Yes
• B. Not Mastered

Answer: A

NEW QUESTION 7

You have a Microsoft Teams Phone deployment
You use Direct Routing with a Survivable Branch Appliance (SBA) at a site. The site experiences an extended internet outage.
Which three PSTN calling scenarios are possible during the outage? Each coned answer presents a complete solution.
NOTE: Each correct selection is worth one point.

• A. dynamic emergency calling
• B. outbound PSTN calls
• C. inbound PSTN calls
• D. call transfer of PSTN calls
• E. hold and resume of PSTN calls

Answer: ABC

Explanation:
Reference:
https://docs.microsoft.com/en-us/skypeforbusiness/plan-your-deployment/enterprise-voice-solution/enterprise-v

NEW QUESTION 8

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You need to create a new call queue to route calls to support agents. The support agents must be able to see their call queue history and the shared transcribed voicemail. The solution must minimize administrative effort.
Solution: You configure the call queue to use a Microsoft 365 group. Does this meet the goal?

• A. Yes
• B. No

Answer: A

Explanation:
Reference:
https://www.orbid365.be/shared-voicemail-arrives-in-teams/

NEW QUESTION 9

You are migrating users from Microsoft Skype for Business to Microsoft Teams.
You plan to create an auto attendant that can be used by all the users during the migration. You need to create the resource account for the auto attendant
What should you use?

• A. the Resource accounts node in the Microsoft Teams admin center
• B. the Users node in the Microsoft 365 admin center
• C. the New-CsHybridApplicationEndpoint cmdlet
• D. the New-CsOnlineApplicationEndpoint cmdlet
• E. the New-CsOnlineApplicationlnstance cmdlet

Answer: A

NEW QUESTION 10


You have a Microsoft Teams Phone deployment. The 613 7010 5XXX phone number range is allocated to the Session Border Controller (SBC). A user named User1 is configured as shown in the following exhibit.
User1 reports that when an external caller attempts to call the phone number of User1, the external caller receives an error message.
User1 can make outbound calls, but no caller ID appears.
Which two commands should you run to resolve the issues? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.
A)

B)

C)

D)

E)

• A. Option A
• B. Option B
• C. Option C
• D. Option D
• E. Option E

Answer: CD

NEW QUESTION 11

You are optimizing a network to better support voice and collaboration workloads in Microsoft Teams. When the users are at a specific corporate site, you need to prevent the users from adding video during calls.
Solution: You run New-csTeamsMeetingPolicy and set the-AllowIPvideo parameter to SFalse. Does this meet the goal?

• A. Yes
• B. No

Answer: B

NEW QUESTION 12

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your company uses Microsoft Teams Calling Plans.
The company acquires a small development team. Currently, users on the team have their own direct inward dial (DID) numbers that have PSTN capabilities.
You migrate the users to Teams.
You need to ensure that the users have phone numbers. Solution: You run the New-CsHybridTelephoneNumber cmdlet. Does this meet the goal?

• A. Yes
• B. No

Answer: B

NEW QUESTION 13

Your company has offices in London and Vancouver
The company has a Teams Phone deployment that uses Calling Plans. The London office contains a user named User1.
User1 moves from the London office to the Vancouver office.
You need to update the phone number and emergency location of User1 to match the new office. What should you do first?

• A. Run New-CsTeamsEmergencyCallingPolicy -Identity Vancouver.
• B. Modify the current Usage location for User1.
• C. Run Grant-CsTeamsEmergencyCallingPolicy -Identity Vancouver.
• D. Add a new emergency location for User1.

Answer: D

Explanation:
Assign an emergency location
You can assign emergency locations for your organization in the Microsoft Teams admin center or by using PowerShell.
To assign an emergency location, be sure the location, users, and phone numbers are all in the same country. Using the Microsoft Teams admin center
In the left navigation of the Microsoft Teams admin center, click Locations > Emergency addresses.
Click Add.
Enter a name and description for the location.
Select the country or region, and then enter the address.
If the address isn't found and you want to manually edit the address, turn on Edit the address manually.
Click Save.
Reference:
https://learn.microsoft.com/en-us/microsoftteams/add-change-remove-emergency-location-organization

NEW QUESTION 14

You have a Microsoft Teams Phone deployment. Direct Routing is enabled for all users. The users can place and receive PSTN calls. You are implementing emergency numbers in Teams.
You need to remove the + symbol from any three-digit calls to the Session Border Controller (SBC)..
How should you complete the PowerShell script? To answer, drag the appropriate values to the correct targets. Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.

• A. Yes
• B. Not Mastered

Answer: A

NEW QUESTION 15

Your company currently allows call park lot all PSIN users. The call pack policies are configured as shown in the exhibit. (Click the Exhibit tab.)

You have a Microsoft 365 group named Help Desk.
You need to ensure that only the Help Desk group can use call park. The solution must minimize the number of policies and administrative effort.
Which three actions should you perform? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

• A. Assign Policy2 to all users.
• B. In the Global (Org-wide default) policy, set Allow call park to Off.
• C. Create a new call park policy named Policy2 and set Allow call park to Off.
• D. Assign Policy1 to the Help Desk group.
• E. Assign the Global (Org-wide default) policy to the users in the Help Desk group.
• F. Create a new call park policy named Policy1 and set Allow call park to On

Answer: BDF

Explanation:
Reference:
https://docs.microsoft.com/en-us/microsoftteams/call-park-and-retrieve

NEW QUESTION 16
......