70-410 Exam Questions - Online Test

70-410 Premium VCE File

Learn More 100% Pass Guarantee - Dumps Verified - Instant Download
150 Lectures, 20 Hours

Ucertify vce 70 410 Questions are updated and all mcsa 70 410 answers are verified by experts. Once you have completely prepared with our vce 70 410 exam prep kits you will be ready for the real examcollection 70 410 exam without a problem. We have Most recent Microsoft exam collections 70 410 dumps study guide. PASSED 70 410 installing and configuring windows server 2012 r2 First attempt! Here What I Did.

P.S. Practical 70-410 testing bible are available on Google Drive, GET MORE: https://drive.google.com/open?id=1gKqa_vO9OeNyYEjdDpkvCkiJIJhS7seE

New Microsoft 70-410 Exam Dumps Collection (Question 1 - Question 10)

Question No: 1

You work as an administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com. All servers on the Contoso.com network have Windows Server 2012 installed.

You are in the process of installing a Server Core installation of Windows Server 2012 on a new Contoso.com server, named ENSUREPASS-SR13.

Which of the following is TRUE with regards to a installing a Server Core installation of Windows Server 2012? (Choose all that apply.)

A. The Server Graphical Shell is installed, but not enabled.

B. Server roles can be configured locally via the command prompt using Windows PowerShell.

C. Server roles can be configured locally via Server Manager.

D. You are able to access the Microsoft Management Console locally.

E. The Desktop Experience is not available.

Answer: B,E

Explanation:

:A. There is no Windows shell and very limited GUI functionality.

:B. The Server Core interface is a command prompt with PowerShell support.

:C. Only Remotely using Server Manager.

:D. Microsoft Management Console is not available locally.

:E. Desktop Experience is not available.

Server Core is a minimal server installation option for computers running on the operating system. Server Core provides a low-maintenance server environment with limited functionality.

The minimal nature of Server Core creates limitations:

There is no Windows shell and very limited GUI functionality. The Server Core interface is a command prompt with PowerShell support.

There is limited MSI support (unattended mode only). Server Graphical Shell is not installed.

Microsoft Management Console: not available locally. Desktop Experience: not available.

Question No: 2

You have a server named Server1 that runs a Server Core Installation of Windows Server

2012 R2. You attach a 4-TB disk to Server1.

The disk is configured as an MBR disk. You need to ensure that you can create a 4-TB volume on the disk.

Which Diskpart command should you use?

A. Expand

B. Attach

C. Automount

D. Convert

Answer: D

Explanation:

You can use Diskpart to convert a basic disk to a dynamic disk. The basic disk can either be empty or contain either primary partitions or logical drives. The basic disk can be a data disk or system or boot drive. A MBR file structure is only capable of 2TB maximum. The disk will have to be converted to a GPT file structure.

GPT is capable of 18 exabytes volumes. Convert gpt u2013 Converts an empty basic disk with the master boot record (MBR) partition style into a basic disk with the GUID partition table (GPT) partition style. The disk may be a basic or a dynamic disk but it must not contain any valid data partitions or volumes.

Question No: 3

You work as an administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com. All servers on the Contoso.com network have Windows Server 2012 installed.

Contoso.com has a server, named ENSUREPASS-SR07, which has the AD DS, DHCP, and DNS server roles installed. Contoso.com also has a server, named ENSUREPASS- SR08, which has the DHCP, and Remote Access server roles installed. You have configured a server, which has the File and Storage Services server role installed, to automatically acquire an IP address.

The server is named ENSUREPASS-SR09. You then create a filter on ENSUREPASS- SR07.

Which of the following is a reason for this configuration?

A. To make sure that ENSUREPASS-SR07 issues ENSUREPASS-SR09 an IP address.

B. To make sure that ENSUREPASS-SR07 does not issue ENSUREPASS-SR09 an IP address.

C. To make sure that ENSUREPASS-SR09 acquires a constant IP address from ENSUREPASS-SR08 only.

D. To make sure that ENSUREPASS-SR09 is configured with a static IP address.

Answer: B

Question No: 4

Your network contains an Active Directory domain named contoso.com.

The domain contains 20 computer accounts in an organizational unit (OU) named OU1. A user account named User1 is in an OU named OU2.

You are configuring a Group Policy object (GPO) named GPO1.

You need to assign User1 the Back up files and directories user right to all of the computer accounts in OU1.

Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)

A. From User Configuration in GPO1, modify the security settings.

B. Link GPO1 to OU1.

C. From Computer Configuration in GPO1, modify the security settings.

D. Modify the Delegation settings of GPO1.

E. Link GPO1 to OU2.

Answer: B,C

Question No: 5

You work as an administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com. All servers in the Contoso.com domain, including domain controllers, have Windows Server 2012 R2 installed.

Contoso.com has a Hyper-V server, named ENSUREPASS-SR13, which hosts multiple virtual machines.

You have enabled the use of Single-root I/O virtualization.

Which of the following is TRUE with regards to using Single-root I/O virtualization? (Choose all that apply.)

A. It maximizes network throughput, while minimizing network latency.

B. It maximizes network throughput, as well as network latency.

C. It avoids the virtual switch stack and allows the virtual machine direct access to the actual network switch.

D. It prevents the virtual machine from accessing the network switch directly.

Answer: A,C

Explanation:

SR-IOV enables network traffic to bypass the software switch layer of the Hyper-V virtualizationstack. Because the VF is assigned to a child partition, the network traffic flows directly between the VF and child partition. As a result, the I/O overhead in the software emulation layer is diminished and achieves network performance that is nearly the same performance as in nonvirtualized environments.

Question No: 6

You have a server that runs Windows Server 2012 R2. The server contains the disks configured as shown in the following table.

You need to create a volume that can store up to 3 TB of user files. The solution must ensure that the user files are available if one of the disks in the volume fails. What should you create?

A. a storage pool on Disk 2 and Disk 3

B. a spanned volume on Disk 2 and Disk 3

C. a mirrored volume on Disk 1 and Disk 3

D. a mirrored volume on Disk 2 and Disk 3

E. a RAID-5 volume on Disk 1, Disk 2, and Disk 3

F. a storage pool on Disk 1 and Disk 3

G. a spanned volume on Disk 0 and Disk 4

H. a mirrored volume on Disk 1 and Disk 4

Answer: D

Question No: 7

Your network contains two Active Directory forests named contoso.com and adatum.com. All servers run Windows Server 2012 R2.

A one-way external trust exists between contoso.com and adatum.com.

Adatum.com contains a universal group named Group1. You need to prevent Group1 from being used to provide access to the resources in contoso.com.

What should you do?

A. Modify the Managed By settings of Group1.

B. Modify the Allowed to Authenticate permissions in adatum.com.

C. Change the type of Group1 to distribution.

D. Modify the name of Group1.

Answer:: B

Explanation:

* Accounts that require access to the customer Active Directory will be granted a special right called Allowed to Authenticate. This right is then applied to computer objects (Active Directory domain controllers and AD RMS servers) within the customer Active Directory to which the account needs access.

* For users in a trusted Windows Server 2008 or Windows Server 2003 domain or forest to be able to access resources in a trusting Windows Server 2008 or Windows Server 2003 domain or forest where the trust authentication setting has been set to selective authentication, each user must be explicitly granted the Allowed to Authenticate permission on the security descriptor of the computer objects (resource computers) that reside in the trusting domain or forest.

Question No: 8

Your network contains two subnets. The subnets are configured as shown in the following table.

You have a server named Server2 that runs Windows Server 2012 R2. Server2 is connected to LAN1. You run the route print command as shown in the exhibit.

You need to ensure that Server2 can communicate with the client computers on LAN2. What should you do?

A. Change the metric of the 10.10.1.0 route.

B. Set the state of the Teredo interface to disable.

C. Set the state of the Microsoft ISATAP Adapter #2 interface to disable.

D. Run route delete 172.23.2.0.

Answer: D

Explanation:

You should delete the route 172.23.2.0 to allow communication between the client computers and Server2. The route is used to identify PIv6 /IPv4 packets that are being sent.

Question No: 9

You have an Active Directory domain named contoso.com. You have a domain controller named Server1 that is configured as a DNS server. Server1 hosts a standard primary zone for contoso.com. The DNS configuration of Server1 is shown in the exhibit.

You discover that stale resource records are not automatically removed from the contoso.com zone.

You need to ensure that the stale resource records are automatically removed from the contoso.com zone.

What should you do?

A. Set the scavenging period of Server1 to 0 days.

B. Modify the Server Aging/Scavenging properties.

C. Configure the aging properties for the contoso.com zone.

D. Convert the contoso.com zone to an Active Directory-integrated zone.

Answer:: C

Explanation:

Scavenging or aging as it is also known as automates the deletion of old records. When scavenging is disabled, these records must be deleted manually or the size of the DNS database can become large and have an adverse effect on performance. In the exhibit it shows that scavenging is enabled on Server1, thus you should configure the aging properties for the zone.

Question No: 10

You perform a Server Core Installation of Windows Server 2012 R2 on a server named Server1.

You need to add a graphical user interface (GUI) to Server1. Which tool should you use?

A. the dism.exe command

B. the Add-WindowsFeature cmdlet

C. the imagex.exe command

D. the setup.exe command

E. the ocsetup.exe command

F. the Add-WindowsPackage cmdlet

G. the Install-Module cmdlet

H. the Install-RoleService cmdlet

Answer: A,B

Explanation:

Add-WindowsFeature -The Add-WindowsFeature cmdlet allows you to install specified roles, role services, and features on a computer that is running Windows Server 2008 R2. Install-WindowsFeature -Installs one or more Windows Server roles, role services, or features on either the local or a specified remote server that is running Windows Server 2012 R2. This cmdlet is equivalent to and replaces Add-WindowsFeature, the cmdlet that was used to install roles, role services, and features in Windows Server 2008 R2.

dism /online /get-features PS C:\> Install-WindowsFeature -Name Web-Server u2013 IncludeAllSubFeature -ComputerName Server1 u2013WhatIf

Recommend!! Get the Practical 70-410 dumps in VCE and PDF From Thedumpscentre, Welcome to download: http://www.thedumpscentre.com/70-410-dumps/ (New 496 Q&As Version)