70-410 Exam Questions - Online Test

70-410 Premium VCE File

Learn More 100% Pass Guarantee - Dumps Verified - Instant Download
150 Lectures, 20 Hours

we provide Best Quality Microsoft exam 70 410 pdf exam cram which are the best for clearing mcsa 70 410 pdf test, and to get certified by Microsoft Installing and Configuring Windows Server 2012. The 70 410 installing and configuring windows server 2012 pdf Questions & Answers covers all the knowledge points of the real 70 410 practice exam exam. Crack your Microsoft 70 410 vce Exam with latest dumps, guaranteed!

Q1. - (Topic 3) 

You work as an administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com. All servers in the Contoso.com domain, including domain controllers, have Windows Server 2012 R2 installed. 

You have been instructed to make sure that Contoso.com users are not able to install a Windows Store application. You then create a rule for packaged apps. 

Which of the following is the rule based on? (Choose all that apply.) 

A. The publisher of the package. 

B. The publisher of the application. 

C. The name of the package 

D. The name of the application 

E. The package version. 

F. The application version. 

Answer: A,C,E 

Explanation: 

Packaged apps (also known as Windows 8 apps) are new to Windows Server 2012 R2 and Windows 8. They are based on the new app model that ensures that all the files within an app package share the same identity. Therefore, it is possible to control the entire application using a single AppLocker rule as opposed to the non-packaged apps where each file within the app could have a unique identity. Windows does not support unsigned packaged apps which implies all packaged apps must be signed. AppLocker supports only publisher rules for Packaged apps. A publisher rule for a Packaged app is based on the following information: Publisher of the package Package name Package version All the files within a package as well as the package installer share these attributes. Therefore, an AppLocker rule for a Packaged app controls both the installation as well as the running of the app. Otherwise, the publisher rules for Packaged apps are no different than the rest of the rule collections; they support exceptions, can be increased or decreased in scope, and can be assigned to users and groups. 

Q2. - (Topic 3) 

You have a server named Server1 that runs Windows Server 2012 R2. 

You plan to enable Hyper-V Network Virtualization on Server1. 

You need to install the Windows Network Visualization Filter Driver on Server1. 

Which Windows PowerShell cmdlet should you run? 

A. Set-NetVirtualizationGlobal 

B. Enable-NetAdapterBinding 

C. Add - WindowsFeature 

D. Set-NetAdapterVmq 

Answer: B 

Explanation: 

Hyper-V Network Virtrtualization runs multiple virtual networks on a physical network. And each virtual network operates as if it is running as a physical network. The Set-NetAdaptercmdlet sets the basic properties of a network adapter such as virtual LAN (VLAN) identifier (ID) and MAC address. Thus if you add the binding parameter to the command then you will be able to install the Windows Network Virtualization Filter Driver. Step one: Enable Windows Network Virtualization (WNV). This is a binding that is applied to the NIC that you External Virtual Switch is bound to. This can be a physical NIC, it can be an LBFO NIC team. Either way, it is the network adapter that your External Virtual Switch uses to exit the server. This also means that if you have multiple virtual networks or multiple interfaces that you can pick and choose and it is not some global setting. If you have one External Virtual Switch this is fairly easy: $vSwitch = Get-VMSwitch -SwitchType External # Check if Network Virtualization is bound # This could be done by checking for the binding and seeing if it is enabled ForEach-Object -InputObject $vSwitch { if ((Get-NetAdapterBinding -ComponentID "ms_netwnv" -InterfaceDescription $_.NetAdapterInterfaceDescription).Enabled -eq $false){ # Lets enable it Enable-NetAdapterBinding -InterfaceDescription $_.NetAdapterInterfaceDescription -ComponentID "ms_netwnv"}} 

Q3. HOTSPOT - (Topic 3) 

You have a server named Server1 that runs Windows Server 2012 R2. 

Several users are members of the local Administrators group. 

You need to ensure that all local administrators receive User Account Control (UAC) 

prompts when they run a Microsoft Management Console (MMC). 

Which settings should you modify from the Local Security Policy? To answer, select the 

appropriate settings in the answer area. 

Answer: 

Q4. - (Topic 1) 

Your network contains an Active Directory forest that contains three domains. 

A group named Group1 is configured as a domain local distribution group in the forest root domain. You plan to grant Group1 read-only access to a shared folder named Share1.Share1 is 

located in a child domain. 

You need to ensure that the members of Group1 can access Share1. 

What should you do first? 

A. Convert Group1 to a universal security group. 

B. Convert Group1 to a global distribution group. 

C. Convert Group1 to a universal distribution group. 

D. Convert Group1 to a domain local security group. 

Answer: A 

Explanation: 

Universal can be used for any domain or forest. Furthermore a Universal group can span multiple domains, even the entire forest. 

References: Exam Ref 70-410: Installing and Configuring Windows Server 2012 R2: Chapter 5: Install and Administer Active Directory, Objective 5.3 Create and manage Active Directory groups and Organization units, p. 289-291, 293 

http://technet.microsoft.com/en-us/library/cc781446(v=ws.10).aspx http://technet.microsoft.com/en-us/library/cc755692(v=ws.10).aspx 

Q5. - (Topic 3) 

You have a server that runs Windows Server 2012 R2. The server contains the disks configured as shown in the following table. 

You need to create a volume that can store up to 3 TB of user files. The solution must ensure that the user files are available if one of the disks in the volume fails. What should you create? 

A. a storage pool on Disk 2 and Disk 3 

B. a spanned volume on Disk 2 and Disk 3 

C. a mirrored volume on Disk 1 and Disk 3 

D. a mirrored volume on Disk 2 and Disk 3 

E. a RAID-5 volume on Disk 1, Disk 2, and Disk 3 

F. a storage pool on Disk 1 and Disk 3 

G. a spanned volume on Disk 0 and Disk 4 

H. a mirrored volume on Disk 1 and Disk 4 

Answer: D 

Q6. - (Topic 2) 

Your network contains an Active Directory domain named contoso.com. The domain contains a domain controller named DC1 that runs Windows Server 2012 R2. 

A user named User1 attempts to log on to DC1, but receives the error message shown in the exhibit. (Click the Exhibit button.) 

You need to ensure that User1 can log on to DC1. What should you do? 

A. Add User1 to the Remote Management Users group. 

B. Grant User1 the Allow log on locally user right. 

C. Modify the Logon Workstations setting of the User1 account. 

D. Modify the Account is sensitive and cannot be delegated setting of the User1 account. 

Answer: B 

Explanation: 

Domain controllers, by default, restrict the types of user accounts that have the ability to log on locally. 

References: Exam Ref 70-410: Installing and Configuring Windows Server 2012 R2, Chapter 6: Create and Manage Group Policy, Objective 6.2: Configure Security Policies, p. 321 Exam Ref 70-410: Installing and Configuring Windows Server 2012 R2, Chapter 2: Configure server roles and features, Objective 2.3: Configure servers for remote management, p. 114 

http://technet.microsoft.com/en-us/library/ee957044(v=ws.10).aspx 

Q7. HOTSPOT - (Topic 2) 

Your network contains an Active Directory forest. The forest contains two domains named Domain1 and Domain2. 

Domain1 contains a file server named Server1. Server1 has a shared folder named Share1. 

Domain2 contains 50 users who require access to Share1. 

You need to create groups in each domain to meet the following requirements: 

. In Domain1, create a group named Group1. Group1 must be granted access to Share1. . In Domain2, create a group named Group2. Group2 must contain the user accounts of the 50 users. . Permission to Share1 must only be assigned directly to Group1. 

Which type of groups should you create and which group nesting strategy should you use? 

To answer, select the appropriate configuration in the answer area. 

Answer: 

Q8. - (Topic 1) 

You have a server named Server1 that runs a Server Core installation of Windows Server 2012 R2. 

Server1 is configured to obtain an IPv4 address by using DHCP. 

You need to configure the IPv4 settings of the network connection on Server1 as follows: 

IP address: 10.1.1.1 

Subnet mask: 255.255.240.0 

Default gateway: 10.1.1.254 

What should you run? 

A. netsh.exe 

B. netcfg.exe 

C. msconfig.exe 

D. ipconfig.exe 

Answer: A 

Explanation: 

In order to configure TCP/IP settings such as the IP address, Subnet Mask, Default 

Gateway, DNS and WINS addresses and many other options you can use Netsh.exe. 

Incorrect: 

Not D: Windows Server 2012 Core still has IPCONFIG.EXE that can be used to view the IP 

configuration. 

Modern servers typically come with several network interface ports. This causes 

IPCONFIG.EXE to scroll off the screen when viewing its output. Consider piping the output 

if IPCONFIG.EXE to a file and view it with Notepad.exe. 

Q9. - (Topic 2) 

You have a server named Server2 that runs Windows Server 2012 R2. 

A network technician installs a new disk on Server2 and creates a new volume. 

The properties of the new volume are shown in the exhibit. (Click the Exhibit button.) 

You need to ensure that you can enable NTFS disk quotas for volume D. 

What should you do first? 

A. Format volume D 

B. Install the File Server Resource Manager role service 

C. Run the convert.exe command 

D. Convert the disk to a dynamic disk 

Answer: A 

Explanation: 

To be able to use a NEW disk so that you can enable NTFS disk quotas, in other word REFS to NTFS, it requires formatting first. 

Q10. HOTSPOT - (Topic 3) 

Your network contains a server named Server1 that runs Windows Server 2012 R2. App1 

has the Print and Document Services server role installed. 

All client computers run Windows 8. 

The network contains a network-attached print device named Printer1. 

From App1, you share Printer1. 

You need to ensure that users who have connected to Printer1 previously can print to 

Printer1 if App1 fails. 

What should you configure? To answer, select the appropriate option in the answer area. 

Answer: