NEW QUESTION 1
Which three statements about storage policy are true? (Choose three.)

• A. To configure a storage policy in Cisco UCS Director, choose Policies > Virtual/Hypervisor Policies > Storage.
• B. The IT administrator can use a virtual storage catalog to customize storage policy, but cannot choose more than one storage policy
• C. To use the storage policy created with additional disk policies, the administrator needs to associate the policy with the VDC.
• D. Storage policy defines resources such as the datastore scope, type of storage, minimum conditions for capacity, latency, and so on.
• E. To configure a storage policy in Cisco UCS Director, choose Storage > Virtual/Hypervisor Policies > Storage Policies.
• F. To use the storage policy created with additional disk policies, the administrator needs to associate the policy with the proper user.

Answer: ACD

NEW QUESTION 2
Which statement is true about computing policy in UCS Director?

• A. Computing policies determine the computing resources used during provisioning that satisfy group or workload requirements.
• B. Computing policy can be created by selecting from the menu, System > Devices > Policies > Compute.
• C. Policy Name in computing policy is used during catalog definition.
• D. The Cloud Name drop-down menu is not mandatory to complete computing policy.
• E. Computing policy can be created by selecting from the menu, Compute > Devices > Policies > Compute Policy.

Answer: A

NEW QUESTION 3
The Cisco UCS Director includes a set of wizards that guide through configuring features. Which three wizards are available in the Cisco UCS Director? (Choose three.)

• A. FlexPod Configuration
• B. VDC Creation
• C. Catalog Configuration
• D. Device Discovery
• E. Zoning Creation
• F. Storage Discovery

Answer: ABD

NEW QUESTION 4
How many instances of Cisco UCS Director does the Cisco Prime Service Catalog allow you to integrate while in managed service provider mode?

• A. 1
• B. 2
• C. 5
• D. up to 10
• E. unlimited

Answer: A

NEW QUESTION 5
What is the order of thecommunication path in a typicalthree-tier application?

• A. WebBrowser->AppTier->WebTier->DBTier
• B. WebBrowser->WebTier->AppTier->DBTier
• C. WebTier->WebBrowser->AppTier->DBTier
• D. WebTier->AppTier->DBTier->BackupTier

Answer: B

NEW QUESTION 6
A cloud administrator is comparing Cisco UCS Director catalogs and Cisco Prime Service Catalog. Which three statements are true regarding Cisco Prime Service Catalog and Cisco UCS Director catalogs? (Choose three.)

• A. Users in Cisco Prime Service Catalog can be assigned to different catalogs than Cisco UCS Director.
• B. List of values fields from Cisco UCS Director will show up on Cisco Prime Service Catalog only after re-sync up.
• C. Post provisioning questions from Cisco UCS Director show up in Cisco Prime Service Catalog.
• D. Users must be assigned access to the same catalogs inCisco UCS Director and Cisco Prime Service Catalog.
• E. List of values fields from Cisco UCS Director show up in Cisco Prime Service Catalog.
• F. Post-provisioning questions from Cisco UCS Director show up in Cisco Prime Service Catalog only after re-sync up.

Answer: ACE

NEW QUESTION 7
Which two statements are true regarding port-profiles and the Cisco Intercloud Fabric virtual machine? (Choose two.)

• A. All port profiles required for creating the Cisco Intercloud Network Policies must be created using Intercloud Fabric.
• B. Trunk ports are supported in the cloud virtual machines.
• C. All port profiles required for deploying a virtual machine must be created using the Cisco Intercloud Fabric.
• D. Trunk ports are supported in virtual machines that will be migrated to the cloud.

Answer: AC

NEW QUESTION 8
Which two statements are true when ordering a three-tier application container on the Cisco Prime Service Catalog and Puppet Agent? (Choose two.)

• A. The Puppet Agent is temporarily installed on the VM to deploy application.
• B. The Puppet Agent is disabled during deployment of application.
• C. The puppet master is on the Cisco Prime Service Catalog.
• D. The puppet master is on the Cisco UCS Director.
• E. The Puppet Agent will be installed onto VMs via VIX in Cisco Prime Service Catalog.

Answer: AC

NEW QUESTION 9
A Cisco UCS Director administrator is tasked with discovering catalogs and templates in Cisco Prime Service Catalog. After you log in to Cisco Prime Service Catalog, describe the steps required to achieve this task.

• A. Administration > Set Up Authorization Processes > UCSD Integration
• B. Administration > User Support Utilities > UCSD Integration
• C. Administration > Manage Connections > UCSD Integration
• D. Administration > Link to Directories > UCSD Integration

Answer: C

NEW QUESTION 10
After creating a service request for VM provisioning in the Intercloud Fabric, what is the timeline for approval?

• A. immediate approval or scheduled approval within a maximum of 90 days from original request
• B. 30-day approval from original request
• C. scheduled approval within a maximum of 120 days from original request
• D. 120-day approval from original request

Answer: A

NEW QUESTION 11
A cloud administrator is tasked with cloning a catalog. Which two properties will be copied into the new catalog? (Choose two.)

• A. IP address
• B. name
• C. VLAN ID
• D. description
• E. attributes

Answer: AC

NEW QUESTION 12
Where do you create a Custom Approval Task in Cisco UCS Director?

• A. Policies > Orchestration > Customer Approval Tasks
• B. Policies > VDC > Customer Approval Tasks
• C. System > Orchestration > Customer Approval Tasks
• D. System > VDC > Customer Approval Tasks

Answer: A

NEW QUESTION 13
In the Cisco Prime Service Catalog, which module allows the application stacks to be designed as a template and published as orderable services in the Cisco Prime Service Catalog storefront?

• A. Stack Designer
• B. Puppet Agent
• C. Service Item Manager
• D. Request Center
• E. Service Catalog

Answer: A

NEW QUESTION 14
You have been tasked with publishing a new catalog. Which two fieldsare available when publishinga new catalog? (Choose two.)

• A. Cloud Name
• B. Catalog Ordering
• C. Image
• D. Select Datacenter
• E. Authorizations

Answer: AC

NEW QUESTION 15
What condition must be met when configuring a Cisco Intercloud Fabric Router for dynamic NAT and adding a rule?

• A. Configure the source IP PAT pool.
• B. Enable the round-robin IP feature.
• C. Use the prefix source condition and an IP pool that contains the public addresses accessible by the provider cloud.
• D. Enable the bidirectional feature.

Answer: C

NEW QUESTION 16
You have been tasked with managing application containers. What occurs when you delete an application container?

• A. All the VMs within the container will be configured to be in a resting configuration.
• B. All the VMs within the container will be powered off.
• C. All the VMs within the container will be deleted.
• D. All the VMs and the database within the container will be deleted.

Answer: C

NEW QUESTION 17
A cost model in UCS Director is used to define the unit level costs of which two virtual resources? (Choose two.)

• A. socket
• B. CPU
• C. RAM
• D. NIC
• E. vNIC
• F. datastore size

Answer: BC

NEW QUESTION 18
An administrator has installed Cisco UCS Director and created a few VMs for the sales department in the enterprise vCenter. Which statement is true regarding sales VMs and Cisco UCS Director?

• A. All VMs created in vCenter prior to Cisco UCS Director installation will not be registered with Cisco UCS Director because they are not prepared using the Cisco UCS Director user interface.
• B. All VMs created in vCenter prior to Cisco UCS Director installation will be recognized in Cisco UCS Director and will remain in errored state.
• C. Cisco UCS Director will automatically discover these VMs and add them to the default VDC.
• D. Administrator is required to create sales VDC on Cisco UCS Director and add these VMs under sales VDC to make them operational.

Answer: C

NEW QUESTION 19
In CiscoVACS, athree-tier container connects to external networks using which technology?

• A. static routes only
• B. static routes or a routing protocol such as EIGRP
• C. VXLAN gateway
• D. OTV

Answer: B

NEW QUESTION 20
Which three properties are available in a Cisco UCS Director computing policy when selecting a filter? (Choose three.)

• A. Fiber Channel storage LUNs
• B. number of CPU cores in the host node
• C. Hypervisor version
• D. total memory in the host node
• E. number of available vNICs
• F. local storage

Answer: BCD

NEW QUESTION 21
Which two statements are true regarding container templates, container catalogs, standard catalogs, and advance catalogs services created in the Cisco Prime Service Catalog for Cisco UCS Director? (Choose two.)

• A. If these services are associated with a group in the Cisco UCS Director, users in the corresponding group in the Cisco Prime Service Catalogs can only order services that the group has access to.
• B. If these services are associated with a group in the Cisco UCS Director, users in all groups in the Cisco Prime Service Catalog can order services that the group has access to.
• C. If the services are associated with All Groups in the Cisco UCS Director, users in the corresponding group in the Cisco Prime Service Catalog can order the services that All Groups have access to.
• D. If the services are associated with All Groups in the Cisco UCS Director, all users in the Cisco Prime Service Catalog can order services.

Answer: AC

NEW QUESTION 22
An end user is logging in to Cisco Prime Service Catalog to order a VM based on Standard Catalog. After the service has been located, how can this task be achieved?

• A. Click Service Reques
• B. Complete the request for
• C. Click Add to Cart.Place order.
• D. Click Order.Complete the order for
• E. Click Save Cart.Place order.
• F. Click Order.Complete the order for
• G. Click Add to Cart.Place order.
• H. Click Service Reques
• I. Complete the order for
• J. Click Save Cart.Place order.

Answer: C

NEW QUESTION 23
Which five steps are included in a typical workflow request? (Choose five.)

• A. initiation
• B. resource allocation
• C. approval
• D. provision
• E. set up cycle schedule
• F. notify
• G. request status
• H. orchestration
• I. ordering

Answer: ABDEF

NEW QUESTION 24
......