NEW QUESTION 1
Your company named Contoso, Ltd., has an Exchange Server 2013 organization named contoso.com.
The network contains an Active Directory domain. The domain contains an organizational unit (OU) named SalesOU. SalesOU contains two users named User1 and User2.
Contoso purchases a domain name adatum.com.
You need to change the primary SMTP address of all the users in SalesOU to use the SMTP suffix of
adatum.com. The solution must not remove the contoso.com email address.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)

• A. Create a new email address policy and apply the policy to the users in SalesOU.
• B. Change the default email address policy to include adatum.com.
• C. Create a new remote domain for adatum.com.
• D. Create a new accepted domain for adatum.com and set the domain type to Authoritative Domain.
• E. Create a new accepted domain for adatum.com and set the domain type to External RelayDomain.

Answer: AD

NEW QUESTION 2
Your company has offices in Miami, Singapore and Montreal. An Active Directory site exists for each office. You have an Exchange Server 2013 organization that contains a server in each site. Each server has the
Mailbox server role and the Client Access Server role installed.
All users connect to the Miami servers to retrieve the public folder hierarchy.
You need to create several public folders on the server in the Singapore office to meet the following requirements:
Ensure that the public folders are available if a single Mailbox server fails.
Ensure that the users in the Singapore office connect to their local server to retrieve the public folder hierarchy.
Which actions should you perform? (Each correct answer presents part of the solution. Choose all that apply.)

• A. Create a new public folder mailbox.
• B. Create a new public folder database.
• C. Run the Add-MailboxDatabaseCopy cmdlet.
• D. For each mailbox in the Singapore office, run the Set-Mailbox cmdlet and specify the–defaultpublicfoldermailbox parameter.
• E. Run the Set-PublicFolderDatabase cmdlet.
• F. For each public folder mailbox, run the Set-Mailbox cmdlet and specify the –defaultpublicfoldermailbox parameter.

Answer: ACD

NEW QUESTION 3
Your company has an Exchange Server 2013 organization. The company hires 200 temporary employees.
You create a mailbox for each temporary employee.
You create a new management role named CustomBaseOptions that uses MyBaseOptions as a parent. You create a new management role named CustomContactInfo that uses MyContactInfo as a parent.
You plan to apply the new management roles to the temporary employees.
You need to identify which management roles must be modified to prevent the temporary employees from performing the following task:
Adding a user photo
Viewing delivery reports
Viewing the Install Apps feature
Changing the value of the office location
Which management roles should you identify?
To answer, select the appropriate management role for each task in the answer area.

Answer:

Explanation: Box 1: CustomBaseOption
Box 2: CustomBaseOption
Box 3: CustomBaseOption
Box 4: CustomContactInfo

NEW QUESTION 4
DRAG DROP
You are evaluating the planned deployment of the additional Exchange Server 2013 servers.
You need to meet the technical requirement for installing all of the anti-spam agents and for enabling antimalware filtering.
What should you do? (To answer, drag the appropriate servers to the correct locations. Each server may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.)

Answer:

Explanation:

NEW QUESTION 5
You have an Exchange Server 2013 organization that contains a server named Server1.
Server1 has an IP address of 10.1.100.16 and is configured to use a default gateway of 10.1.100.1. You deploy a hardware load balancer that is configured to use the IP addresses of 192.168.101.31 and
10.1.100.31.
A user named User1 has a client computer that has an IP address of 102.168.101.201. User1 reports that he cannot view his mailbox by using Outlook Web App.
When you review the IIS logs on Server1, you discover the following information:
#Fields: date time cs-method cs-uri-stem s-port c-ipcs(Referer) sc-status2013-01-09 00:08:55 POST
/owa/ev.owa2 443 192.168.101.201 https://owa.fabrikam.com/owa/ 200
You need to ensure that User1 can access his mailbox successfully from Outlook Web App.
What are two possible ways to achieve this goal? (Each correct answer presents a complete solution. Choose two.)

• A. Configure the hardware load balancer to use the same certificate as the certificate used on Server1.
• B. Configure the hardware load balancer to use source NAT (SNAT).
• C. Configure the computer of User1 to ignore response headers.
• D. Modify the default gateway of Server1.

Answer: BD

NEW QUESTION 6
You have an Exchange Server 2013 organization that contains mailboxes for multiple companies. You need to segment the address lists in the organization per company.
What should you assign to the users of each company?

• A. Address book policies (ABPs)
• B. Address lists
• C. Global Address Lists (GALs)
• D. Email address policies

Answer: A

NEW QUESTION 7
You have an Exchange Server 2013 organization.
You create a script named New-CustomMailbox.ps1 to create mailboxes based on your company's requirements.
You create a role group named Mailbox Provisioning.
You need to ensure that the members of Mailbox Provisioning can create new mailboxes only by using New-CustomMailbox.ps1.
In which sequence should you run the commands? (To answer, move all of the commands from the list of commands to the answer area and arrange them in the correct order.)

Answer:

Explanation:

NEW QUESTION 8
You have an Exchange Server 2013 organization that contains five servers.
Your company has a finance department, a marketing department, and a research department.
Users in the marketing department are prevented from creating more than two Exchange ActiveSync device associations.
You have a user named User5 in the finance department.
You need to prevent User5 from creating more than two Exchange ActiveSync device associations. Which cmdlet should you use?

• A. Set-ThrottlingPolicyAssociation
• B. Set-ResourcePolicy
• C. Set-ActiveSyncMailboxPolicy
• D. Set-CASMailbox

Answer: A

NEW QUESTION 9
You have an Exchange Server 2013 organization that contains four servers named EX1, EX2, EX3, and EX4. All of the servers are members of a database availability group (DAG) named DAG1.
Each server has a copy of a mailbox database named DB1. DB1 has the following characteristics:
The replay lag time on Ex4 is set to 14 days.
Single item recovery on all of the servers is set to 14 days.
None of the servers have Volume Shadow Copy Service (VSS) backups.
Ex4 has a folder named F:RDB that is used to store database files during restore operations.
Twenty days ago, a user named User1 deleted an email message that had a subject of "Sales Report". You need to restore the deleted email message to the mailbox of User1.
You copy the lagged database and the log files that are older than 20 days to F:RDB. Which three actions should you perform?
To answer, move the three appropriate actions from the list of actions to the answer area and arrange them in the correct order.

Answer:

Explanation:

NEW QUESTION 10
You have an exchange Server 2013 organization that contains one server. A user named User 1 report that he cannot view several email messages from his mobile device. He confirms that he can view the email messages by using Microsoft Outlook. You need to enable and view the Exchange ActiveSync log for User1.
Which two actions should you perform? (Each

Answer:

Explanation: References:
https://support.microsoft.com/en-us/help/2461792/how-to-collect-activesync-device-logs-totroubleshoot-
sync-issues-betw

NEW QUESTION 11
You need to recommend a temporary solution to reroute all of the outbound email messages through the Miami mail appliance during the planned replacement of the New York mail appliance.
What are three possible ways to achieve the goal? (Each correct answer presents a complete solution. Choose three.)

• A. Modify the value of the SmartHost of the Send connector in the New York office.
• B. Increase the cost of the Send connector in the Miami office.
• C. Increase the cost of the Send connector in the New York office.
• D. Decrease the cost of the Send connector in the New York office,
• E. Modify the value of the SmartHost of the Send connector in the Miami office.
• F. Disable the Send connector in the New York office.

Answer: ACF

NEW QUESTION 12
You have an Exchange Server 2013 organization named adatum.com. The organization contains a server named Server1. Server1 is a member of a Database Availability Group (DAG) named DAG1.
You have a user named Sales1 in the Sales department.
You need to prevent Sales1 from submitting more than 75 email messages per minute to the Exchange Server organization by using Microsoft Outlook.
Which three commands should you run in sequence? (To answer, move the appropriate three commands from the list of commands to the answer area and arrange them in the correct order.)

Answer:

Explanation: new-throttlingpolicy limits –messageratelimit 75
$b = get-throttlingpolicy limits
set-mailbox –identity sales1 –throttlingpolicy $b

NEW QUESTION 13
HOTSPOT
You need to recommend which command must be run to remove the email notifications from all of the servers if App1 malfunctions again.
Which command should you recommend? (To answer, configure the appropriate options in the answer area.)

Answer:

Explanation:

NEW QUESTION 14
You have an Exchange Server 2010 organization that contains 10 Client Access servers and 20 Mailbox servers. The organization has several throttling policies deployed.
You need to identify which throttling policies will be used for different connection scenarios. In the table below identify which throttling policies will be used for each scenario.
NOTE: Make only one selection in each row.

Answer:

Explanation:

NEW QUESTION 15
Your company has three main offices. Each office is configured as an Active Directory site as shown in the exhibit (Click the Exhibit button.)

You have an Exchange Server 2013 organization. Each office contains Exchange servers.
All users access their mailbox by using Outlook Web App. All of the users have a mailbox on a server in their respective office.
Use the drop-down menus to select the answer choice that completes each statement.

Answer:

Explanation:

NEW QUESTION 16
You have an Exchange Server 2013 organization.
You need to ensure that users receive a notification if the delivery of a message is delayed for more than one hour.
Which cmdlet should you use?

• A. Set-FrontEndTransportService
• B. Set-MailboxTransportService
• C. Set-Tra nsportConf ig
• D. Set-TransportService

Answer: D

NEW QUESTION 17
You have an Exchange Server 2013 organization that contains one Client Access server. The Client Access server is accessible from the Internet by using a network address translation (NAT) device.
You deploy an additional Client Access server.
You also deploy an L4 hardware load balancer between the Client Access servers and the NAT device.
After deploying the hardware load balancer, you discover that all of the Exchange Server traffic is directed to a single Client Access server.
You need to ensure that the hardware load balancer distributes traffic evenly across both Client Access servers. What should you do?

• A. Change the default route of the Client Access servers to point to the hardware load balancer.
• B. Configure the NAT device to pass the original source IP address of all connections from the Internet.
• C. Configure the Client Access servers to have a second IP address and web sit
• D. Create the Exchange virtual directories in the new sites.
• E. Configure SSL offloading on the hardware load balancer and the Client Access servers.

Answer: B

NEW QUESTION 18
Your network contains three Exchange Server 2013 servers that have the Client Access server role installed. Each server is configured as a POP3 server and an IMAP4 server.
You deploy the Network Load Balancing (NLB) feature on the servers and configure NLB as shown in the exhibit (Click the Exhibit button.)

Use the drop-down menus to select the answer choice that completes each statement.

Answer:

Explanation:

NEW QUESTION 19
You have an internal network and a perimeter network. On the perimeter network, you deploy two Exchange Server 2013 servers that have the Edge Transport server role installed. On the internal network, you deploy five Exchange Servers that have the Mailbox server role and the Client Access server role installed.
You need to recommend a solution to ensure that email messages are received by the organization if the Edge Transport server fails. The solution must ensure that the server are load balanced.
What is the best recommendation to achieve the goal? More than one answer choice may achieve the goal. Select the BEST answer.

• A. For each Edge Transport server, create a host (A) recor
• B. Create mail exchanger (MX) records that point to the A record
• C. Set the preference of both MX records to a value of 100.
• D. Create a mail exchanger (MX) record that points to the IP address of each Edge Transport serve
• E. Set the preference of both MX records to a value of 10.
• F. For each Edge Transport server, create a host (A) recor
• G. Create mail exchanger (MX) records that point to the A record
• H. Set the preference of one of the MX records to a value of 11. Set preference of the other MX record to a value of 12.
• I. Create a host (A) record named amil.contoso.com that contains the IP addresses for both Edge Transport server
• J. Create a mail exchanger (MX) record that points to mail.contoso.com.

Answer: A