300-075 Exam Questions - Online Test

300-075 Premium VCE File

Learn More 100% Pass Guarantee - Dumps Verified - Instant Download
150 Lectures, 20 Hours

It is more faster and easier to pass the Cisco cisco 300 075 exam by using Virtual Cisco Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2) questuins and answers. Immediate access to the Refresh 300 075 pdf Exam and find the same core area 300 075 pdf questions with professionally verified answers, then PASS your exam with a high score now.

Q71. How is a SIP trunk in Cisco Unified Communications Manager configured for SIP precondition? 

A. The configuration is done by selecting a SIP precondition trunk for trunk type. 

B. The configuration is automatically selected when RSVP is enabled for the location assigned to the trunk. 

C. SIP precondition is configured by selecting E2E for RSVP over SIP on the default SIP profile assigned to the SIP trunk. 

D. SIP precondition is configured by configuring a new SIP profile and selecting E2E for RSVP over SIP. The new SIP profile must then be assigned to the SIP trunk. 

Answer: D 

Q72. When an H.323 trunk is added for Call Control Discovery, which statement is true? 

A. The H.323 trunk is added by selecting Inter-Cluster Trunk (Non-Gatekeeper Controlled) and Device Protocol Inter-Cluster Trunk. The Enable SAF check box should be selected in the trunk configuration. 

B. The H.323 trunk is added by selecting Inter-Cluster Trunk (Non-Gatekeeper Controlled) and Device Protocol Inter-Cluster Trunk. The Trunk Service Type should be Call Control Discovery. 

C. The H.323 trunk is added by selecting Call Control Discovery Trunk and then selecting 

H.323 as the protocol to be used. 

D. The H.323 trunk is added by selecting H.323 Trunk, and selecting Inter-Cluster Trunk as the Device Protocol. The destination IP address field is configured as ‘SAF’ to indicate that this trunk is used for SAF. 

Answer: A 

Explanation: 

Reference. Implementing Cisco Unified Communications Manager Part 2 (CIPT2), Chapter3: Implementing Multisite Connections, pg 70-71, Fig 3-14 and Fig 3-15 

Q73. Refer to the exhibit. 

Which configuration elements must match for adjacent neighbors to establish a SAF neighbor relationship? 

A. the label name specified in the router eigrp command 

B. the autonomous-system number specified in the service-family ipv4 autonomous-system command 

C. the sf-interface configuration 

D. the topology base configurations 

E. the label name specified in the router eigrp command and the autonomous-system number 

Answer: B 

Explanation: 

Incorrect Answer: A, C, D, E service-family ipv4 autonomous-system 1 enables a Cisco SAF service family for the specified autonomous system on the router Link: 

http://www.cisco.com/en/US/docs/ios/saf/configuration/guide/saf_cg_ps10591_TSD_Products_Configuration_Guide_Chapter.html#wp1056363 

Q74. When an external call is placed from Ajax, they would like the ANI that is sent to the PSTN to be the main number, not the extension. For domestic calls, they would like 10 digits sent; for international calls, they would like to send the country code 1 and the 10 digits. How can this be accomplished? 

A. Add a translation pattern to the dial peers in the gateway that adds the appropriate digits to the outgoing ANI. 

B. In the external call route patterns, set the external phone number mask to the main number. Use 10 digits in the domestic route pattern and 1 followed by the main number digits in the international route patterns. 

C. Use a calling party transform mask for each route group in the corresponding route list configuration. Set the explicit 10-digit main number for domestic calls and 1 followed by the main number for the international route patterns. 

D. In the directory number configurations, set the prefix digits field to the country code and the 10 digits of the main number. This will be truncated to the 10-digit number for domestic calls and sent out in its entirety for international calls. 

Answer: C 

Explanation: 

Incorrect Answer: A, B, D calling party transformation mask value is Valid entries for the NANP include the digits 0 through 9; the wildcard characters X, asterisk (*), and octothorpe (#); and the international escape character +. Link: 

http://www.cisco.com/en/US/docs/voice_ip_comm/cucmbe/admin/8_6_1/ccmcfg/b03trpat.ht ml 

Q75. Refer to the exhibit. 

The HQ site uses area code 650. The BR1 site uses area code 408. The long distance national code for PSTN dialing is 1. To make a long distance national call, an HQ or BR1 user dials access code 9, followed by 1, and then the 10-digit number. 

Both sites use MGCP gateways. AAR must use globalized call routing using a single route pattern. Assume that all outgoing PSTN numbers are localized at the egress gateway as shown in the exhibit. 

How many route lists and route groups should be configured for AAR at a minimum? 

A. a single route list with a local route group for each site 

B. two route lists and two route groups for each site 

C. a single route list and four route groups for each site 

D. None. The AAR CSS can point directly to the route pattern. 

Answer: A 

Q76. Refer to the exhibit. 

How many calls can be placed to Cluster B? 

A. three G.729 calls 

B. one G.711 call 

C. one G.711 and three G.729 calls 

D. There is no limit for incoming calls to Cluster B. Outgoing calls are limited to one G.711 and three G.729 calls. 

Answer: A 

Q77. Which three options describe the main functions of SAF Clients? (Choose three.) 

A. registering the router as a client with the SAF network B. providing publishing services to the SAF network 

C. subscribing to SAF network services 

D. registering Cisco Unified Communications Manager subscribers with the publisher 

E. starting Cisco Unified Communications Manager services throughout the cluster 

F. integrating with Cisco IM and Presence for additional services 

Answer: A,B,C 

Q78. Which E.164 transformation pattern represents phone numbers in Germany? 

A. \+49.! 

B. 49.! 

C. \49.! 

D. \+49.X 

Answer: A 

Q79. Which process can localize a global E.164 with + prefix calling numbers for inbound calls to an IP phone so that users see the calling number in a local format? 

A. Calling number localization is done using translation patterns. 

B. Calling number localization is done using route patterns. 

C. Calling number localization is done by configuring a calling party transformation CSS at the phone. 

D. Calling number localization is done by configuring a calling party transformation CSS at the gateway. 

E. Calling number localization is done by configuring the phone directory number in a localized format. 

Answer: C 

Q80. Where do you specify the device mobility group and physical location after they have been configured? 

A. phones 

B. DMI 

C. device mobility CSS 

D. device pool 

E. MRGL 

F. locale 

Answer: D 

Explanation: 

Incorrect Answer: A, B, C, E Before you configure a device pool, you must configure the following items if you want to choose them for the device pool, Cisco Unified Communications Manager group (required), Date/time group (required). Region (required) , SRST reference (optional). Media resource group list (optional), Calling search space for auto-registration (optional). Reverted call focus priority (optional), Device mobility group (optional), Device mobility calling search space, Physical location (optional). Location, AAR group. AAR calling search space. Link: 

https://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmcfg/b02devpl.ht ml