NEW QUESTION 1
Scenario: A Citrix Administrator has a Citrix ADC SDX with four VPX instances configured. The SDX has a 10GB bandwidth license that has been configured with dedicated bandwidth of 2GB for each instance. However, the administrator found that three instances do NOT ever reach the bandwidth limit, while one instance reaches the limit and needs 1GB more bandwidth to accommodate increased traffic requests.
What can the administrator change on the instance that requires more bandwidth, to meet traffic requirements?

• A. Configure burst capacity on the instance adding 1 GB of bandwidth with burst priority 0.
• B. Purchase an SDX license to increase the bandwidth on the instances.
• C. Configure burst capacity of 1GB with priority 10.
• D. Configure LA channel to increase the bandwidth.

Answer: C

NEW QUESTION 2
A Citrix Administrator receives complaints from some users that authentication for the Citrix Gateway site fails.
Which tool can the administrator use to find data regarding time of failure and a list of users facing this issue?

• A. Gateway Insight
• B. Security Insight
• C. Web Insight
• D. HDX Insight

Answer: A

NEW QUESTION 3
Scenario: A Citrix Administrator is managing a Citrix ADC SDX running eight Citrix ADC instances. The administrator first needs to upgrade the firmware on the instances. However; the administrator is concerned that it needs to be done all at once.
What upgrading flexibility does SDX provide in this scenario?

• A. The Citrix ADC instances have to be upgraded at the same time.
• B. It is NOT possible to upgrade the Citrix ADC instances to different firmware versions.
• C. The Citrix ADC instance can be upgraded at the SDX management level, allowing all instances to be upgraded at once.
• D. The Citrix ADC instance can be upgraded on an individual basis, allowing all instances to run different firmware versions.

Answer: A

NEW QUESTION 4
Scenario: A Citrix Administrator is configuring a Citrix ADC high availability (HA) pair with an existing Primary Citrix ADC with all resources configured. The administrator added the Secondary Citrix ADC in high availability and found that the configuration on the existing primary was removed. It is now the Secondary Citrix ADC in the HA pair.
Which two configurations could the administrator have made to prevent this from happening? (Choose two.)

• A. Enable HA monitoring on all the interfaces of the SECONDARY device.
• B. Set the Secondary Citrix ADC to STAY SECONDARY in the Configure HA Node settings.
• C. Set the Primary Citrix ADC to STAY PRIMARY in the Configure HA Node settings.
• D. Enable HA monitoring on all the interfaces of the PRIMARY device.

Answer: CD

NEW QUESTION 5
Which command should a Citrix Administrator use to configure a Content Switching virtual server for implementing the Citrix Secure Web Gateway in the transparent proxy mode?

• A. add cs vserver swgVS PROXY * 21 –Authn401 on –authnVsName transparent-auth-vs
• B. add cs vserver swgVS PROXY** -Authn401 on –authnVsName explicit-auth-vs
• C. add cs vserver swgVS PROXY 192.168.10.1 –Authn401 on –authnVsName transparent-auth-vs
• D. add cs vserver swgVS PROXY 192.168.10.1 80 –Authn401 on –authnVsName transparent-auth-vs

Answer: C

NEW QUESTION 6
A Citrix Administrator has configured the Citrix ADC as a DNS Proxy Server. The administrator executed the following commands on the Citrix ADC using command-line interface:

What will be the effect of executing the above commands?

• A. Set the AA bit of DNS Request
• B. Set the AA bit of DNS Response
• C. Unset the AA bit of DNS Request
• D. Unset the AA bit of DNS Response

Answer: B

NEW QUESTION 7
For which three components can Citrix Director capture utilization statistics? (Choose three.)

• A. CPU
• B. IOPS
• C. Disk space
• D. Network
• E. Memory

Answer: ABE

NEW QUESTION 8
When users log on to Citrix Receiver, they are NOT able to see their line-of-business application by default and are frequently calling the help desk to locate the application.
Which phrase can a Citrix Administrator add to the application properties, so that line-of-business application is added to Favorites and users cannot remove the application from Favorites?

• A. “KEYWORDS: Prefer”
• B. “KEYWORDS: Mandatory”
• C. “KEYWORDS: Auto”
• D. “KEYWORDS: Featured”

Answer: B

NEW QUESTION 9
Scenario: A Citrix Administrator is concerned about the amount of health checks the Citrix ADC is sending to the backend resources. The administrator would like to find a way to remove health checks from specific bound services.
How can the administrator accomplish this?

• A. Use reverse condition monitoring.
• B. Use the No-Monitor option.
• C. Unbind the current monitor.
• D. Use Service Groups to minimize health checks.

Answer: B

NEW QUESTION 10
Scenario: A Lead Citrix Administrator for a large company hired a new administrator for the team to help manage a Citrix Virtual Desktops infrastructure. The new administrator will need to manage user sessions and power-manage machines within the Delivery Group but should NOT be able to create any new objects.
Which role should the lead administrator create for the new administrator?

• A. Delivery Group Administrator
• B. Machine Catalog Administrator
• C. Help Desk Administrator
• D. Host Administrator

Answer: C

NEW QUESTION 11
In a Global Server Load Balancing (GSLB) Active/Active environment, the connection proxy is used as the site persistence method.
What is used to source the traffic when connection is proxied?

• A. Client source IP
• B. LDNS IP Address
• C. Virtual IP (VIP)
• D. Subnet IP (SNIP)

Answer: D

NEW QUESTION 12
Which step does a Citrix Administrator need to take to enable Citrix XML Service trust for user access within a Citrix Virtual Apps and Desktops infrastructure?

• A. Enable XML Service trust using the StoreFront console.
• B. Run the Set-BrokerSite -TrustRequestsSentToTheXMLServicePort $true PowerShell command from within a Virtual Delivery Agent (VDA) machine.
• C. Run the Set-BrokerSite -TrustRequestsSentToTheXMLServicePort $true PowerShell command from within a Controller.
• D. Configure the appropriate XML Service trust settings using HDX policy within Citrix Studio.

Answer: C

NEW QUESTION 13
A user calls the help desk to report that when launching any application from within their published desktop session, it takes a long time and the overall performance is poor.
Which Citrix Director report can a Citrix Administrator use to initiate the investigation of the issue?

• A. Machine Utilization in Machine Details
• B. Launch Failures in Trends
• C. Load Evaluator in Trends
• D. Session Data in Filters

Answer: C

NEW QUESTION 14
Which tool should a Citrix Administrator use when a user reports “event ID 1022: The Citrix Desktop Service Failed to register with any controller”?

• A. HDX Monitor
• B. VDA Cleanup Utility
• C. Citrix Scout
• D. Citrix Health Assistant

Answer: D

NEW QUESTION 15
A Citrix Administrator has executed the commands in the screenshot on the Citrix ADC using the command-line interface.
Click on the ‘Exhibit’ button to view the screenshot of the command-line interface.

Which two replacements will be the outcome of executing these commands? (Choose two.)

• A. https:// will be replaced by http:// in the HTTP REQUEST
• B. http:// will be replaced by https:// in the HTTP REQUEST
• C. http:// will be replaced by https:// in the HTTP RESPONSE
• D. https:// will be replaced by http:// in the HTTP RESPONSE

Answer: AD

NEW QUESTION 16
Which Citrix ADC Access Control List (ACL) command can a Citrix Administrator use to bridge traffic originating from 192.168.10.200?

• A. add ns simpleacl6
• B. add ns acl6
• C. add ns acl
• D. add ns simpleacl

Answer: C

NEW QUESTION 17
Scenario: A Citrix Administrator has enabled an HDX Session printers policy within a Citrix Virtual Apps and Desktops Site. The administrator added a printer to a print server and assigned the printer to all users through a session printer policy. In addition, several local client printers are auto-created within HDX sessions. No other printing policies are configured.
How will print jobs be routed when users send print jobs to a printer managed by the print server?

• A. Directly to the network print server and then to the specified printer.
• B. Over the HDX virtual channel to the specified printer attached to the print server.
• C. Directly from the session Virtual Delivery Agent (VDA) machine to the printer.
• D. Over the HDX virtual channel, through the endpoint, and then to the print server.

Answer: A

NEW QUESTION 18
A Citrix Administrator is configuring a Citrix ADC high availability (HA) pair and needs to ensure that one Citrix ADC is UP and primary at all times to ensure the business websites are always available.
What does the administrator need to do to ensure that the Citrix ADCs still handle web traffic in the event that both nodes become unavailable or fail a health check?

• A. Disable HA Fail-safe mode on the Primary Citrix ADC only.
• B. Configure HA Fail-safe mode on each Citrix ADC independently.
• C. Configure HA Fail-safe mode on the Primary Citrix ADC only.
• D. Disable HA Fail-safe mode on the Secondary Citrix ADC.

Answer: B

NEW QUESTION 19
A Citrix Administrator needs to block access to multiple URLs for security reasons. Which configuration should the administrator use to accomplish this requirement?

• A. Option A
• B. Option B
• C. Option C
• D. Option D

Answer: B

NEW QUESTION 20
What must a Citrix Administrator do to encrypt XML traffic between StoreFront and the Delivery Controllers?

• A. Install a private server certificate on each StoreFront server and then add a new Internet Information Services (IIS) binding for HTTPS.
• B. Install a private server certificate on each Delivery Controller and bind the certificates to port 443.
• C. Install a private certificate on each Delivery Controller and StoreFront serve
• D. Restart each server to force XML communication to be encrypted.
• E. Install a private server certificate on each StoreFront serve
• F. Open the StoreFront console and use the https:// prefix with the base URL.

Answer: A

NEW QUESTION 21
A Citrix Administrator configured the Responder policy to redirect the request for root page to the home page.
However, after executing the command, the webpage access entered a loop, as shown in the second screenshot.
Click on the ‘Exhibit’ buttons to view the screenshots.


How will the administrator rectify this issue?

• A. Change Responder action expression to “/”
• B. Change Responder Policy expression to http.REQ.URL.Contains(“/”)
• C. Change Responder Action expression to http.REQ.URL
• D. Change Responder Policy expression to http.REQ.URL.EQ(“/”)

Answer: D

NEW QUESTION 22
......